[gnome-user-docs/gnome-3-0] g-h: revisions for clarity, typos, addition of completed card reader modified: gnome-help/C/bluet



commit 98eff01b5d882c3fc6550a8b9c0132760c02b781
Author: Kelly Sinnott <ksinnott5ht gmail com>
Date:   Mon Jun 6 13:48:17 2011 -0700

    g-h: revisions for clarity, typos, addition of completed card reader
    	modified:   gnome-help/C/bluetooth-problem-connecting.page
    	new file:   gnome-help/C/hardware-cardreader.page
    	deleted:    gnome-help/C/hardware-cardreader.page.stub
    	modified:   gnome-help/C/hardware-driver.page
    	modified:   gnome-help/C/hardware-problems-graphics.page
    	modified:   gnome-help/C/keyboard-cursor-blink.page
    	modified:   gnome-help/C/mouse-lefthanded.page

 gnome-help/C/bluetooth-problem-connecting.page |    8 ++--
 gnome-help/C/hardware-cardreader.page          |   62 ++++++++++++++++++++++++
 gnome-help/C/hardware-cardreader.page.stub     |   26 ----------
 gnome-help/C/hardware-driver.page              |   10 ++--
 gnome-help/C/hardware-problems-graphics.page   |    2 +-
 gnome-help/C/keyboard-cursor-blink.page        |    2 +-
 gnome-help/C/mouse-lefthanded.page             |    2 +-
 7 files changed, 74 insertions(+), 38 deletions(-)
---
diff --git a/gnome-help/C/bluetooth-problem-connecting.page b/gnome-help/C/bluetooth-problem-connecting.page
index c1a2445..096d017 100644
--- a/gnome-help/C/bluetooth-problem-connecting.page
+++ b/gnome-help/C/bluetooth-problem-connecting.page
@@ -7,7 +7,7 @@
     <link type="guide" xref="hardware#bluetooth"/>
     <link type="seealso" xref="hardware-driver"/>
     
-    <desc>The adapter could be turned off or doesn't have drivers, or Bluetooth might be disabled or blocked.</desc>
+    <desc>The adapter could be turned off or may not have drivers, or Bluetooth might be disabled or blocked.</desc>
 
     <revision pkgversion="3.0" date="2011-04-04" status="final"/>
     <revision pkgversion="3.0" version="3.0.1" date="2011-04-06" status="outdated"/>
@@ -25,12 +25,12 @@
 <list>
  <item>
   <p>Connection blocked or untrusted</p>
-  <p>Some Bluetooth devices block connections by default, or require you to change a setting to allow connections to be made. Make sure that your device is set-up to allow connections.</p>
+  <p>Some Bluetooth devices block connections by default, or require you to change a setting to allow connections to be made. Make sure that your device is setup to allow connections.</p>
  </item>
  
  <item>
   <p>Bluetooth hardware not recognized</p>
-  <p>Your Bluetooth adapter/dongle may not have been recognized by the computer. This could be because drivers for the adapter aren't installed. Some Bluetooth adapters aren't supported on Linux, and so you may not be able to get the right drivers for them. In this case, you will probably have to get a different Bluetooth adapter.</p>
+  <p>Your Bluetooth adapter/dongle may not have been recognized by the computer. This could be because drivers for the adapter aren't installed. Some Bluetooth adapters aren't supported on Linux, so you may not be able to get the right drivers for them. In this case, you will probably have to get a different Bluetooth adapter.</p>
  </item>
  
  <item>
@@ -40,7 +40,7 @@
  
  <item>
   <p>Device Bluetooth connection switched off</p>
-  <p>Check that Bluetooth is turned-on on the device you're trying to connect to. For example, if you're trying to connect to a phone, make sure that it's not in airplane mode</p>
+  <p>Check that Bluetooth is turned on on the device you're trying to connect to. For example, if you're trying to connect to a phone, make sure that it's not in airplane mode.</p>
  </item>
 </list>
 
diff --git a/gnome-help/C/hardware-cardreader.page b/gnome-help/C/hardware-cardreader.page
new file mode 100644
index 0000000..e84e459
--- /dev/null
+++ b/gnome-help/C/hardware-cardreader.page
@@ -0,0 +1,62 @@
+<page xmlns="http://projectmallard.org/1.0/";
+      type="topic"
+      id="hardware-cardreader">
+
+  <info>
+    <link type="guide" xref="media#photos"/>
+    <link type="guide" xref="hardware#problems"/>
+    
+    <desc>Troubleshoot media card readers</desc>
+    
+    <revision pkgversion="3.0" version="0.1" date="2011-04-24" status="outdated"/>
+    <credit type="author">
+      <name>GNOME Documentation Project</name>
+      <email>gnome-doc-list gnome org</email>
+    </credit>
+    
+    <include href="legal.xml" xmlns="http://www.w3.org/2001/XInclude"/>
+  </info>
+
+<title>My media card reader doesn't work</title>
+
+<p>Many computers contain readers for SD, MMC, SM, MS, CF, and other storage media 
+cards. These should be automatically detected and <link xref="disk-partitions">mounted</link>. Here are some 
+troubleshooting steps if they are not:</p>
+
+<steps>
+<item>
+<p> Make sure that the card is put in correctly. Many cards look as though they are 
+�upside down� when correctly inserted. Also make sure that the card is firmly seated 
+in the slot; some cards, especially CF, require a small amount of force to insert 
+correctly. (Be careful not to push too hard! If you come up against something solid, 
+do not force it.)</p>
+</item>
+
+<item>
+<p> Open <app>Files</app> by using the <gui>Activities</gui> menu. Does the inserted
+ card appear in the <gui>Devices</gui> list in the left sidebar? Sometimes the card appears in this list but is not mounted; click it once to mount. (If the sidebar is not visible, press <key>F9</key> or click 
+ <guiseq><gui>View</gui><gui> Sidebar</gui><gui> Show Sidebar</gui></guiseq>.)
+</p>
+</item>
+
+<item>
+<p>If your card does not show up in the sidebar, click <guiseq><gui>Go</gui><gui>Computer</gui></guiseq>. 
+If your card reader is correctly configured, the reader should come up as a drive 
+when no card is present, and the card itself when the card has been mounted (see the picture below).</p>
+</item>
+
+<item>
+<p>If you see the card reader but not the card, the problem may be with the card itself. 
+Try a different card or check the card on a different reader if possible.</p>
+</item>
+</steps>
+
+<p>If no cards or drives are available in the <gui>Computer</gui> folder, 
+it is possible that your card reader does not work with Linux due to driver issues. 
+If your card reader is internal (inside the computer instead of sitting outside) 
+this is more likely. The best solution is to directly connect your device 
+(camera, cell phone, etc.) to a USB port on the computer. USB external card 
+readers are also available, and are far better supported by Linux.</p>
+
+</page>
+
diff --git a/gnome-help/C/hardware-driver.page b/gnome-help/C/hardware-driver.page
index acedfc7..471b453 100644
--- a/gnome-help/C/hardware-driver.page
+++ b/gnome-help/C/hardware-driver.page
@@ -5,7 +5,7 @@
   <info>
     <link type="guide" xref="hardware" group="driver"/>
     
-    <desc>A hardware/device driver is something that allows your computer to use devices that are attached to it.</desc>
+    <desc>A hardware/device driver allows your computer to use devices that are attached to it.</desc>
     
     <revision pkgversion="3.0" date="2011-04-04" status="final"/>
     <revision pkgversion="3.0" version="3.0.1" date="2011-04-06" status="outdated"/>
@@ -19,14 +19,14 @@
 
 <title>What is a driver?</title>
 
-<p>There are lots of different devices that can be attached to your computer. These can include things that are attached to it externally, like printers and monitors, to things that are inside the computer itself, like graphics cards and sound cards.</p>
+<p>Devices are the physical "parts" of your computer. They may be <em>external</em> like printers and monitor or <em>internal</em> like graphics and audio cards.</p>
 
 <p>In order for your computer to be able to use these devices, it needs to know how to communicate with them. This is done by a piece of software called a <em>device driver</em>.</p>
 
-<p>When you attach a device to your computer, you must have the correct driver installed for that device to work. For example, if you plug-in a printer but the correct driver isn't available, you won't be able to use the printer. Normally, different makes and models of device have different drivers, so you can't use the driver for one device to try and get a different device to work.</p>
+<p>When you attach a device to your computer, you must have the correct driver installed for that device to work. For example, if you plug in a printer but the correct driver isn't available, you won't be able to use the printer. Normally, each model of device uses a driver that is not compatible with any other model.</p>
 
-<p>On Linux, the drivers for most devices are installed by default, so everything should just work when you plug it in. Some devices don't have drivers, however, so may not work. You might need to install the correct driver yourself, or the correct driver may not even be available!</p>
+<p>On Linux, the drivers for most devices are installed by default, so everything should work when you plug it in. However, the drivers may need to be installed manually or may not be available at all. </p>
 
-<p>In addition, some drivers are incomplete or don't work properly. In this case, some of the features of your device may not work; for example, you might find that your printer can't do double-sided printing.</p>
+<p>In addition, some existing drivers are incomplete or partially non-functional. For example, you might find that your printer can't do double-sided printing, but is otherwise completely functional.</p>
 
 </page>
diff --git a/gnome-help/C/hardware-problems-graphics.page b/gnome-help/C/hardware-problems-graphics.page
index 3dec43f..4c0afee 100644
--- a/gnome-help/C/hardware-problems-graphics.page
+++ b/gnome-help/C/hardware-problems-graphics.page
@@ -20,6 +20,6 @@
 
 <title>Screen problems</title>
 
-<p>Most problems with the display are caused by graphics drivers that aren't working properly or the wrong settings being used. Which of the topics below best describes the problem you are experiencing?</p>
+<p>Most problems with the display are caused by issues with graphics drivers or configuration. Which of the topics below best describes the problem you are experiencing?</p>
 
 </page>
diff --git a/gnome-help/C/keyboard-cursor-blink.page b/gnome-help/C/keyboard-cursor-blink.page
index a65996e..837c24c 100644
--- a/gnome-help/C/keyboard-cursor-blink.page
+++ b/gnome-help/C/keyboard-cursor-blink.page
@@ -21,7 +21,7 @@
 
   <title>Make the keyboard cursor blink</title>
 
-  <p>You could lose the keyboard cursor in a text field, but if the keyboard cursor blinks, it is easier to find it.
+  <p>It is possible to lose the keyboard cursor in a text field. Setting it to blink may make it easier to locate on the screen.
   To make the cursor blink and to adjust the speed of it:</p>
 
   <steps>
diff --git a/gnome-help/C/mouse-lefthanded.page b/gnome-help/C/mouse-lefthanded.page
index 0f530b6..ef79a69 100644
--- a/gnome-help/C/mouse-lefthanded.page
+++ b/gnome-help/C/mouse-lefthanded.page
@@ -27,7 +27,7 @@ mouse or touchpad to make it more comfortable for left-handed use.</p>
 <steps>
   <item><p>Click your name on the top bar and select <gui>System Settings</gui>.</p></item>
   <item><p>Click <gui>Mouse and Touchpad</gui>.</p></item>
-  <item><p>On the <gui>Mouse</gui> tab, select <gui>Left-handed</gui>. This
+  <item><p>On the <gui>Mouse</gui> tab, select <gui>Left-handed</gui>. These
   settings will affect both your mouse and touchpad.</p></item>
 </steps>
 



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]