[tracker/tracker-1.0] functional-tests: Replace use of PyGObject and PyGTK with PyGI



commit 0ae4bb23fb3c55dfcdeba09df304fa05a54751d2
Author: Sam Thursfield <sam afuera me uk>
Date:   Sun Jul 20 12:12:18 2014 +0100

    functional-tests: Replace use of PyGObject and PyGTK with PyGI
    
    If we do 'import gobject' anywhere then we cannot use the new
    GObject-introspection based Python bindings, because they conflict.
    
    This change means the functional tests can now use PyGI, instead of the
    deprecated and out-of-date PyGObject and PyGTK.
    
    Note that the dbus-python bindings are still widely used in the
    functional-tests. These work fine but are deprecated. We should
    switch to using GDBus through GObject-introspection instead when possible.

 tests/functional-tests/09-concurrent-query.py      |    6 ++--
 tests/functional-tests/10-sqlite-misused.py        |    8 ++--
 tests/functional-tests/11-sqlite-batch-misused.py  |    8 ++--
 tests/functional-tests/13-threaded-store.py        |   10 +++---
 tests/functional-tests/14-signals.py               |   10 +++---
 .../functional-tests/301-miner-resource-removal.py |    2 +-
 tests/functional-tests/common/utils/helpers.py     |   32 ++++++++++----------
 tests/functional-tests/common/utils/system.py      |   10 +++---
 tests/functional-tests/fts-tc.py                   |    4 +-
 tests/functional-tests/mass-storage-mode.py        |    4 +-
 10 files changed, 47 insertions(+), 47 deletions(-)
---
diff --git a/tests/functional-tests/09-concurrent-query.py b/tests/functional-tests/09-concurrent-query.py
index 4cc626e..652d428 100755
--- a/tests/functional-tests/09-concurrent-query.py
+++ b/tests/functional-tests/09-concurrent-query.py
@@ -26,7 +26,7 @@ import time
 import random
 import commands
 import signal
-import gobject
+from gi.repository import GObject
 from dbus.mainloop.glib import DBusGMainLoop
 
 from common.utils import configuration as cfg
@@ -43,7 +43,7 @@ class TestConcurrentQuery (CommonTrackerStoreTest):
     holding those queries
     """
     def setUp (self):
-        self.main_loop = gobject.MainLoop ()
+        self.main_loop = GObject.MainLoop ()
         
         self.mock_data_insert ()
         self.finish_counter = 0
@@ -81,7 +81,7 @@ class TestConcurrentQuery (CommonTrackerStoreTest):
                                                             error_handler=self.error_handler)
             
         # Safeguard of 50 seconds. The last reply should quit the loop
-        gobject.timeout_add_seconds (60, self.timeout_cb)
+        GObject.timeout_add_seconds (60, self.timeout_cb)
         self.main_loop.run ()
         
     def reply_cb (self, results):
diff --git a/tests/functional-tests/10-sqlite-misused.py b/tests/functional-tests/10-sqlite-misused.py
index 0e7f1ec..f1b8ca7 100755
--- a/tests/functional-tests/10-sqlite-misused.py
+++ b/tests/functional-tests/10-sqlite-misused.py
@@ -22,7 +22,7 @@ Test the query while importing at the same time. This was raising
 some SQLITE_MISUSED errors before.
 """
 import os, dbus
-import gobject
+from gi.repository import GObject
 from dbus.mainloop.glib import DBusGMainLoop
 
 from common.utils import configuration as cfg
@@ -35,7 +35,7 @@ class TestSqliteMisused (CommonTrackerStoreTest):
     Send queries while importing files (in .ttl directory)
     """
     def setUp (self):
-        self.main_loop = gobject.MainLoop ()
+        self.main_loop = GObject.MainLoop ()
         self.files_counter = 0
         
     def test_queries_while_import (self):
@@ -49,9 +49,9 @@ class TestSqliteMisused (CommonTrackerStoreTest):
                                      reply_handler=self.loaded_success_cb,
                                      error_handler=self.loaded_failed_cb)
         
-        gobject.timeout_add_seconds (2, self.run_a_query)
+        GObject.timeout_add_seconds (2, self.run_a_query)
         # Safeguard of 60 seconds. The last reply should quit the loop
-        gobject.timeout_add_seconds (60, self.timeout_cb)
+        GObject.timeout_add_seconds (60, self.timeout_cb)
         self.main_loop.run ()
 
     def run_a_query (self):
diff --git a/tests/functional-tests/11-sqlite-batch-misused.py 
b/tests/functional-tests/11-sqlite-batch-misused.py
index be24044..230fe99 100755
--- a/tests/functional-tests/11-sqlite-batch-misused.py
+++ b/tests/functional-tests/11-sqlite-batch-misused.py
@@ -22,7 +22,7 @@ Test the query while running BatchSparqlUpdate at the same time. This was raisin
 some SQLITE_MISUSED errors before.
 """
 import os, dbus
-import gobject
+from gi.repository import GObject
 from dbus.mainloop.glib import DBusGMainLoop
 
 from common.utils import configuration as cfg
@@ -40,7 +40,7 @@ class TestSqliteBatchMisused (CommonTrackerStoreTest):
     to configure properly the environment
     """
     def setUp (self):
-        self.main_loop = gobject.MainLoop ()
+        self.main_loop = GObject.MainLoop ()
         self.batch_counter = 0
         
     def test_queries_while_batch_insert (self):
@@ -72,9 +72,9 @@ class TestSqliteBatchMisused (CommonTrackerStoreTest):
                         self.batch_counter += 1
                         
         
-        gobject.timeout_add_seconds (2, self.run_a_query)
+        GObject.timeout_add_seconds (2, self.run_a_query)
         # Safeguard of 60 seconds. The last reply should quit the loop
-        gobject.timeout_add_seconds (60, self.timeout_cb)
+        GObject.timeout_add_seconds (60, self.timeout_cb)
         self.main_loop.run ()
 
     def run_a_query (self):
diff --git a/tests/functional-tests/13-threaded-store.py b/tests/functional-tests/13-threaded-store.py
index 7caddeb..bda0adc 100755
--- a/tests/functional-tests/13-threaded-store.py
+++ b/tests/functional-tests/13-threaded-store.py
@@ -22,8 +22,8 @@ Test that the threads in the daemon are working:
  A very long query shouldn't block smaller queries.
 """
 import os, dbus
-import gobject
-import glib
+from gi.repository import GObject
+from gi.repository import GLib
 import time
 from dbus.mainloop.glib import DBusGMainLoop
 
@@ -46,7 +46,7 @@ class TestThreadedStore (CommonTrackerStoreTest):
     Reported in bug NB#183499
     """
     def setUp (self):
-        self.main_loop = gobject.MainLoop ()
+        self.main_loop = GObject.MainLoop ()
         self.simple_queries_counter = AMOUNT_SIMPLE_QUERIES
         self.simple_queries_answers = 0
 
@@ -101,8 +101,8 @@ class TestThreadedStore (CommonTrackerStoreTest):
                                                        reply_handler=self.reply_complex,
                                                        error_handler=self.error_handler_complex)
 
-        self.timeout_id = glib.timeout_add_seconds (MAX_TEST_TIME, self.__timeout_on_idle)
-        glib.timeout_add_seconds (SIMPLE_QUERY_FREQ, self.__simple_query)
+        self.timeout_id = GLib.timeout_add_seconds (MAX_TEST_TIME, self.__timeout_on_idle)
+        GLib.timeout_add_seconds (SIMPLE_QUERY_FREQ, self.__simple_query)
         self.main_loop.run ()
 
     def __simple_query (self):
diff --git a/tests/functional-tests/14-signals.py b/tests/functional-tests/14-signals.py
index c999f05..19b01fa 100755
--- a/tests/functional-tests/14-signals.py
+++ b/tests/functional-tests/14-signals.py
@@ -27,8 +27,8 @@ import unittest2 as ut
 from common.utils.storetest import CommonTrackerStoreTest as CommonTrackerStoreTest
 from common.utils import configuration as cfg
 
-import gobject
-import glib
+from gi.repository import GObject
+from gi.repository import GLib
 import dbus
 from dbus.mainloop.glib import DBusGMainLoop
 import time
@@ -49,7 +49,7 @@ class TrackerStoreSignalsTests (CommonTrackerStoreTest):
     """
     def setUp (self):
         self.clean_up_list = []
-        self.loop = gobject.MainLoop()
+        self.loop = GObject.MainLoop()
         dbus_loop = DBusGMainLoop(set_as_default=True)
         self.bus = dbus.SessionBus (dbus_loop)
         self.timeout_id = 0
@@ -79,7 +79,7 @@ class TrackerStoreSignalsTests (CommonTrackerStoreTest):
         """
         In the callback of the signals, there should be a self.loop.quit ()
         """
-        self.timeout_id = glib.timeout_add_seconds (REASONABLE_TIMEOUT, self.__timeout_on_idle)
+        self.timeout_id = GLib.timeout_add_seconds (REASONABLE_TIMEOUT, self.__timeout_on_idle)
         self.loop.run ()
 
     def __timeout_on_idle (self):
@@ -100,7 +100,7 @@ class TrackerStoreSignalsTests (CommonTrackerStoreTest):
         self.results_inserts = inserts
 
         if (self.timeout_id != 0):
-            glib.source_remove (self.timeout_id )
+            GLib.source_remove (self.timeout_id )
             self.timeout_id = 0
         self.loop.quit ()
         self.bus._clean_up_signal_match (self.cb_id)
diff --git a/tests/functional-tests/301-miner-resource-removal.py 
b/tests/functional-tests/301-miner-resource-removal.py
index edf48b8..2394f37 100755
--- a/tests/functional-tests/301-miner-resource-removal.py
+++ b/tests/functional-tests/301-miner-resource-removal.py
@@ -28,7 +28,7 @@ from common.utils.helpers import MinerFsHelper, StoreHelper, ExtractorHelper, lo
 from common.utils.system import TrackerSystemAbstraction
 
 import dbus
-import glib
+from gi.repository import GLib
 import os
 import shutil
 import unittest2 as ut
diff --git a/tests/functional-tests/common/utils/helpers.py b/tests/functional-tests/common/utils/helpers.py
index 0d6cb79..3a43cc9 100644
--- a/tests/functional-tests/common/utils/helpers.py
+++ b/tests/functional-tests/common/utils/helpers.py
@@ -18,8 +18,8 @@
 # 02110-1301, USA.
 #
 import dbus
-import glib
-import gobject
+from gi.repository import GLib
+from gi.repository import GObject
 import commands
 import os
 import signal
@@ -62,7 +62,7 @@ class Helper:
         if self.bus is not None:
             return
 
-        self.loop = gobject.MainLoop ()
+        self.loop = GObject.MainLoop ()
 
         dbus_loop = DBusGMainLoop (set_as_default=True)
         self.bus = dbus.SessionBus (dbus_loop)
@@ -146,20 +146,20 @@ class Helper:
         self.process = self._start_process ()
 
         # Run the loop until the bus name appears, or the process dies.
-        self.process_watch_timeout = glib.timeout_add (200, self._process_watch_cb)
+        self.process_watch_timeout = GLib.timeout_add (200, self._process_watch_cb)
 
         self.loop.run ()
 
-        glib.source_remove (self.process_watch_timeout)
+        GLib.source_remove (self.process_watch_timeout)
 
     def stop (self):
         if self.available:
             # It should step out of this loop when the miner disappear from the bus
-            glib.idle_add (self._stop_process)
-            self.timeout_id = glib.timeout_add_seconds (REASONABLE_TIMEOUT, self._timeout_on_idle_cb)
+            GLib.idle_add (self._stop_process)
+            self.timeout_id = GLib.timeout_add_seconds (REASONABLE_TIMEOUT, self._timeout_on_idle_cb)
             self.loop.run ()
             if self.timeout_id is not None:
-                glib.source_remove(self.timeout_id)
+                GLib.source_remove(self.timeout_id)
 
         log ("[%s] stop." % self.PROCESS_NAME)
         # Disconnect the signals of the next start we get duplicated messages
@@ -302,7 +302,7 @@ class StoreHelper (Helper):
                     filtered_list += [insert]
 
             if matched and in_main_loop:
-                glib.source_remove (self.graph_updated_timeout_id)
+                GLib.source_remove (self.graph_updated_timeout_id)
                 self.graph_updated_timeout_id = 0
                 self.inserts_match_function = None
                 self.loop.quit ()
@@ -319,7 +319,7 @@ class StoreHelper (Helper):
         (existing_match, self.inserts_list) = match_cb (self.inserts_list, False)
 
         if not existing_match:
-            self.graph_updated_timeout_id = glib.timeout_add_seconds (REASONABLE_TIMEOUT,
+            self.graph_updated_timeout_id = GLib.timeout_add_seconds (REASONABLE_TIMEOUT,
                                                                       self._graph_updated_timeout_cb)
             self.inserts_match_function = match_cb
 
@@ -351,7 +351,7 @@ class StoreHelper (Helper):
                     filtered_list += [delete]
 
             if matched and in_main_loop:
-                glib.source_remove (self.graph_updated_timeout_id)
+                GLib.source_remove (self.graph_updated_timeout_id)
                 self.graph_updated_timeout_id = 0
                 self.deletes_match_function = None
 
@@ -364,7 +364,7 @@ class StoreHelper (Helper):
         (existing_match, self.deletes_list) = match_cb (self.deletes_list, False)
 
         if not existing_match:
-            self.graph_updated_timeout_id = glib.timeout_add_seconds (REASONABLE_TIMEOUT,
+            self.graph_updated_timeout_id = GLib.timeout_add_seconds (REASONABLE_TIMEOUT,
                                                                       self._graph_updated_timeout_cb)
             self.deletes_match_function = match_cb
 
@@ -514,10 +514,10 @@ class MinerFsHelper (Helper):
                                                           dbus_interface=cfg.MINER_IFACE)
 
         # It should step out of this loop after progress changes to "Idle"
-        self.timeout_id = glib.timeout_add_seconds (REASONABLE_TIMEOUT, self._timeout_on_idle_cb)
+        self.timeout_id = GLib.timeout_add_seconds (REASONABLE_TIMEOUT, self._timeout_on_idle_cb)
         self.loop.run ()
         if self.timeout_id is not None:
-            glib.source_remove (self.timeout_id)
+            GLib.source_remove (self.timeout_id)
 
         bus_object = self.bus.get_object (cfg.MINERFS_BUSNAME,
                                           cfg.MINERFS_OBJ_PATH)
@@ -541,12 +541,12 @@ class MinerFsHelper (Helper):
                                                           signal_name="Progress",
                                                           path=cfg.MINERFS_OBJ_PATH,
                                                           dbus_interface=cfg.MINER_IFACE)
-        self.timeout_id = glib.timeout_add_seconds (REASONABLE_TIMEOUT, self._timeout_on_idle_cb)
+        self.timeout_id = GLib.timeout_add_seconds (REASONABLE_TIMEOUT, self._timeout_on_idle_cb)
 
         self.loop.run ()
 
         if self.timeout_id is not None:
-            glib.source_remove (self.timeout_id)
+            GLib.source_remove (self.timeout_id)
         self.bus._clean_up_signal_match (self.status_match)
 
 
diff --git a/tests/functional-tests/common/utils/system.py b/tests/functional-tests/common/utils/system.py
index 9636b8c..855fa49 100644
--- a/tests/functional-tests/common/utils/system.py
+++ b/tests/functional-tests/common/utils/system.py
@@ -4,8 +4,8 @@ import subprocess
 import shutil
 import configuration as cfg
 
-import gobject
-import glib
+from gi.repository import GObject
+from gi.repository import GLib
 import dbus
 from dbus.mainloop.glib import DBusGMainLoop
 import time
@@ -231,14 +231,14 @@ if __name__ == "__main__":
     def destroy_the_world (a):
         a.tracker_store_testing_stop ()
         print "   stopped"
-        gtk.main_quit()
+        Gtk.main_quit()
 
     print "-- Starting store --"
     a = TrackerSystemAbstraction ()
     a.tracker_store_testing_start ()
     print "   started, waiting 5 sec. to stop it"
-    glib.timeout_add_seconds (5, destroy_the_world, a)
-    gtk.main ()
+    GLib.timeout_add_seconds (5, destroy_the_world, a)
+    Gtk.main ()
 
     print "-- Starting miner-fs --"
     b = TrackerMinerFsLifeCycle ()
diff --git a/tests/functional-tests/fts-tc.py b/tests/functional-tests/fts-tc.py
index 025dcc1..1c5686d 100644
--- a/tests/functional-tests/fts-tc.py
+++ b/tests/functional-tests/fts-tc.py
@@ -27,7 +27,7 @@ import random
 import commands
 import configuration
 from dbus.mainloop.glib import DBusGMainLoop
-import gobject
+from gi.repository import GObject
 import shutil
 from subprocess import Popen,PIPE
 
@@ -115,7 +115,7 @@ class TestUpdate (unittest.TestCase):
         self.miner=dbus.Interface (miner_obj,dbus_interface=MINER_IFACE)
 
 
-        self.loop = gobject.MainLoop()
+        self.loop = GObject.MainLoop()
         self.dbus_loop = DBusGMainLoop(set_as_default=True)
         self.bus = dbus.SessionBus (self.dbus_loop)
 
diff --git a/tests/functional-tests/mass-storage-mode.py b/tests/functional-tests/mass-storage-mode.py
index fe19a8a..0844b21 100644
--- a/tests/functional-tests/mass-storage-mode.py
+++ b/tests/functional-tests/mass-storage-mode.py
@@ -25,7 +25,7 @@ import random
 import commands
 import configuration
 from dbus.mainloop.glib import DBusGMainLoop
-import gobject
+from gi.repository import GObject
 import shutil
 
 TRACKER = 'org.freedesktop.Tracker1'
@@ -95,7 +95,7 @@ class TestUpdate (unittest.TestCase):
         self.miner=dbus.Interface (miner_obj,dbus_interface=MINER_IFACE)
 
 
-        self.loop = gobject.MainLoop()
+        self.loop = GObject.MainLoop()
         self.dbus_loop = DBusGMainLoop(set_as_default=True)
         self.bus = dbus.SessionBus (self.dbus_loop)
 


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]