[mutter/wip/smcv/disoriented: 40/42] tests: Make it easier to keep track of where we are

[Jonas Ådahl <jadahl src gnome org>]

commit fb2d800f34f766f003c40637e669563584c1c930
Author: Simon McVittie <smcv debian org>
Date:   Mon Oct 11 09:39:37 2021 +0100

    tests: Make it easier to keep track of where we are
    
    The monitor orientation tests do a lot of things in sequence. Replace
    some of the comments with g_test_message() so that the log from a failed
    test gives us a better idea of how far we got.
    
    Signed-off-by: Simon McVittie <smcv debian org>

 src/tests/monitor-unit-tests.c | 45 ++++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 19 deletions(-)
---
diff --git a/src/tests/monitor-unit-tests.c b/src/tests/monitor-unit-tests.c
index 4a1566a6d0..a45569e9ef 100644
--- a/src/tests/monitor-unit-tests.c
+++ b/src/tests/monitor-unit-tests.c
@@ -2853,8 +2853,7 @@ meta_test_monitor_lid_closed_with_hotplugged_external (void)
                       check_monitor_configuration (&test_case.expect));
   check_monitor_test_clients_state ();
 
-  /* External monitor connected */
-
+  g_test_message ("External monitor connected");
   test_case.setup.n_outputs = 2;
   test_case.expect.n_outputs = 2;
   test_case.expect.n_monitors = 2;
@@ -2870,8 +2869,7 @@ meta_test_monitor_lid_closed_with_hotplugged_external (void)
                       check_monitor_configuration (&test_case.expect));
   check_monitor_test_clients_state ();
 
-  /* Lid closed */
-
+  g_test_message ("Lid closed");
   test_case.expect.monitors[0].current_mode = -1;
   test_case.expect.logical_monitors[0].monitors[0] = 1,
   test_case.expect.n_logical_monitors = 1;
@@ -2895,8 +2893,7 @@ meta_test_monitor_lid_closed_with_hotplugged_external (void)
    *  4) Open lid
    */
 
-  /* Lid opened */
-
+  g_test_message ("Lid opened");
   test_case.expect.monitors[0].current_mode = 0;
   test_case.expect.logical_monitors[0].monitors[0] = 0,
   test_case.expect.logical_monitors[1].monitors[0] = 1,
@@ -2913,8 +2910,7 @@ meta_test_monitor_lid_closed_with_hotplugged_external (void)
                       check_monitor_configuration (&test_case.expect));
   check_monitor_test_clients_state ();
 
-  /* External monitor disconnected */
-
+  g_test_message ("External monitor disconnected");
   test_case.setup.n_outputs = 1;
   test_case.expect.n_outputs = 1;
   test_case.expect.n_monitors = 1;
@@ -2929,8 +2925,7 @@ meta_test_monitor_lid_closed_with_hotplugged_external (void)
                       check_monitor_configuration (&test_case.expect));
   check_monitor_test_clients_state ();
 
-  /* Lid closed */
-
+  g_test_message ("Lid closed");
   test_case.expect.logical_monitors[0].monitors[0] = 0,
   test_case.expect.n_logical_monitors = 1;
   test_case.expect.screen_width = 1024;
@@ -2943,8 +2938,7 @@ meta_test_monitor_lid_closed_with_hotplugged_external (void)
                       check_monitor_configuration (&test_case.expect));
   check_monitor_test_clients_state ();
 
-  /* Lid opened */
-
+  g_test_message ("Lid opened");
   test_setup = create_monitor_test_setup (&test_case.setup,
                                           MONITOR_TEST_FLAG_NO_STORED);
   meta_backend_test_set_is_lid_closed (META_BACKEND_TEST (backend), FALSE);
@@ -3556,6 +3550,7 @@ meta_sensors_proxy_reset (MetaSensorsProxyMock *proxy)
   MetaOrientationManager *orientation_manager =
     meta_backend_get_orientation_manager (backend);
 
+  g_test_message ("Resetting proxy");
   meta_sensors_proxy_mock_set_orientation (proxy,
                                            META_ORIENTATION_NORMAL);
   wait_for_orientation (orientation_manager, META_ORIENTATION_NORMAL, NULL);
@@ -3878,6 +3873,7 @@ meta_test_monitor_orientation_initial_rotated (void)
   MetaOrientation orientation;
   int times_signalled = 0;
 
+  g_test_message ("%s", G_STRFUNC);
   orientation_mock = meta_sensors_proxy_mock_get ();
   touch_device = meta_test_add_touch_device (backend);
   orientation = META_ORIENTATION_LEFT_UP;
@@ -3984,6 +3980,7 @@ meta_test_monitor_orientation_initial_rotated_no_touch_mode (void)
   MetaOrientation orientation;
   int times_signalled = 0;
 
+  g_test_message ("%s", G_STRFUNC);
   orientation_mock = meta_sensors_proxy_mock_get ();
   orientation = META_ORIENTATION_LEFT_UP;
   meta_sensors_proxy_mock_set_orientation (orientation_mock, orientation);
@@ -4098,6 +4095,7 @@ meta_test_monitor_orientation_initial_stored_rotated (void)
       return;
     }
 
+  g_test_message ("%s", G_STRFUNC);
   orientation_mock = meta_sensors_proxy_mock_get ();
   touch_device = meta_test_add_touch_device (backend);
   orientation = META_ORIENTATION_RIGHT_UP;
@@ -4115,6 +4113,7 @@ meta_test_monitor_orientation_initial_stored_rotated (void)
                       check_monitor_configuration_per_orientation (
                         &test_case.expect, 0, orientation, 960, 540));
 
+  g_test_message ("Closing lid");
   meta_backend_test_set_is_lid_closed (META_BACKEND_TEST (backend), TRUE);
   meta_monitor_manager_lid_is_closed_changed (monitor_manager);
 
@@ -4123,6 +4122,7 @@ meta_test_monitor_orientation_initial_stored_rotated (void)
                       check_monitor_configuration_per_orientation (
                         &test_case.expect, 0, orientation, 960, 540));
 
+  g_test_message ("Rotating to left-up");
   orientation = META_ORIENTATION_LEFT_UP;
   meta_sensors_proxy_mock_set_orientation (orientation_mock, orientation);
   wait_for_orientation (orientation_manager, orientation, &times_signalled);
@@ -4137,8 +4137,10 @@ meta_test_monitor_orientation_initial_stored_rotated (void)
                         &test_case.expect, 0, orientation, 960, 540));
 
   /* When no touch device is available, the orientation change is ignored */
+  g_test_message ("Removing touch device");
   meta_backend_test_remove_device (META_BACKEND_TEST (backend), touch_device);
 
+  g_test_message ("Rotating to right-up");
   orientation = META_ORIENTATION_RIGHT_UP;
   meta_sensors_proxy_mock_set_orientation (orientation_mock, orientation);
   wait_for_orientation (orientation_manager, orientation, &times_signalled);
@@ -4248,6 +4250,7 @@ meta_test_monitor_orientation_initial_stored_rotated_no_touch (void)
       return;
     }
 
+  g_test_message ("%s", G_STRFUNC);
   orientation_mock = meta_sensors_proxy_mock_get ();
   orientation = META_ORIENTATION_RIGHT_UP;
   meta_sensors_proxy_mock_set_orientation (orientation_mock, orientation);
@@ -4265,6 +4268,7 @@ meta_test_monitor_orientation_initial_stored_rotated_no_touch (void)
                         &test_case.expect, 0, META_ORIENTATION_NORMAL,
                         960, 540));
 
+  g_test_message ("Closing lid");
   meta_backend_test_set_is_lid_closed (META_BACKEND_TEST (backend), TRUE);
   meta_monitor_manager_lid_is_closed_changed (monitor_manager);
 
@@ -4371,6 +4375,7 @@ meta_test_monitor_orientation_changes (void)
   MetaOrientation i;
   int times_signalled = 0;
 
+  g_test_message ("%s", G_STRFUNC);
   orientation_mock = meta_sensors_proxy_mock_get ();
   touch_device = meta_test_add_touch_device (backend);
   test_setup = create_monitor_test_setup (&test_case.setup,
@@ -4432,6 +4437,7 @@ meta_test_monitor_orientation_changes (void)
             initial_config);
 
   /* When no touch device is available, the orientation changes are ignored */
+  g_test_message ("Removing touch device");
   meta_backend_test_remove_device (META_BACKEND_TEST (backend), touch_device);
 
   for (i = META_N_ORIENTATIONS - 1; i > META_ORIENTATION_UNDEFINED; i--)
@@ -4594,6 +4600,7 @@ meta_test_monitor_orientation_changes_with_hotplugging (void)
   MetaOrientation i;
   int times_signalled = 0;
 
+  g_test_message ("%s", G_STRFUNC);
   orientation_mock = meta_sensors_proxy_mock_get ();
   touch_device = meta_test_add_touch_device (backend);
 
@@ -4631,7 +4638,7 @@ meta_test_monitor_orientation_changes_with_hotplugging (void)
   g_assert_cmpint (times_signalled, <=, 1);
   check_monitor_configuration (&test_case.expect);
 
-  /* External monitor connected */
+  g_test_message ("External monitor connected");
   test_case.setup.n_outputs = 2;
   test_case.expect.n_outputs = 2;
   test_case.expect.n_monitors = 2;
@@ -4664,7 +4671,7 @@ meta_test_monitor_orientation_changes_with_hotplugging (void)
   g_assert_cmpint (times_signalled, <=, 1);
   check_monitor_configuration (&test_case.expect);
 
-  /* Lid closed */
+  g_test_message ("Lid closed");
   test_case.expect.monitors[0].current_mode = -1;
   test_case.expect.logical_monitors[0].monitors[0] = 1,
   test_case.expect.n_logical_monitors = 1;
@@ -4701,7 +4708,7 @@ meta_test_monitor_orientation_changes_with_hotplugging (void)
    *  2) Disconnect external monitor
    */
 
-  /* Lid opened */
+  g_test_message ("Lid opened");
   test_case.expect.monitors[0].current_mode = 0;
   test_case.expect.logical_monitors[0].monitors[0] = 0,
   test_case.expect.logical_monitors[1].monitors[0] = 1,
@@ -4718,7 +4725,7 @@ meta_test_monitor_orientation_changes_with_hotplugging (void)
 
   for (i = META_N_ORIENTATIONS - 1; i > META_ORIENTATION_UNDEFINED; i--)
     {
-      /* Closing lid */
+      g_test_message ("Closing lid");
       test_case.expect.monitors[0].current_mode = -1;
       test_case.expect.logical_monitors[0].monitors[0] = 1,
       test_case.expect.n_logical_monitors = 1;
@@ -4737,7 +4744,7 @@ meta_test_monitor_orientation_changes_with_hotplugging (void)
       g_assert_cmpint (times_signalled, <=, 1);
       check_monitor_configuration (&test_case.expect);
 
-      /* Open the lid */
+      g_test_message ("Opening lid");
       test_case.expect.monitors[0].current_mode = 0;
       test_case.expect.logical_monitors[0].monitors[0] = 0,
       test_case.expect.logical_monitors[1].monitors[0] = 1,
@@ -4760,7 +4767,7 @@ meta_test_monitor_orientation_changes_with_hotplugging (void)
                           check_monitor_configuration_per_orientation (
                             &test_case.expect, 0, i, 1024, 768));
 
-      /* External monitor disconnected */
+      g_test_message ("External monitor disconnected");
       test_case.setup.n_outputs = 1;
       test_case.expect.n_outputs = 1;
       test_case.expect.n_monitors = 1;
@@ -4774,7 +4781,7 @@ meta_test_monitor_orientation_changes_with_hotplugging (void)
                           check_monitor_configuration_per_orientation (
                             &test_case.expect, 0, i, 1024, 768));
 
-      /* External monitor connected */
+      g_test_message ("External monitor connected");
       test_case.setup.n_outputs = 2;
       test_case.expect.n_outputs = 2;
       test_case.expect.n_monitors = 2;