[Ekiga-list] linksys SPA-3102 + ekiga

[Damien Sandras]

Le vendredi 29 juin 2007 à 15:57 +0200, Alessio Sangalli a écrit :
> Hi, I've been trying to call in local network (same switch, no routing
> no NAT, no SIP registration, direct IP call) a linksys-sipura SPA-3102
> with a regular analog phone attached.
> 
> I only had success using the codec "PCMA" or "PCMU", any other codec
> would let the telephone ring but, when I picked up the receiver, I
> continued to get the calling tone at the ekiga side, altough there was
> "connected with IP" on the status label.
> 
> At first I thought that there were "pitch" problems with PCMU but it
> seems I had a false alarm due to the eccessive gain used on my headset
> microphone.
> 
> The Linksys SPA-3102 shows these choices as "preferred codecs":
> G711a
> G711u
> G726-8
> G726-16
> G726-24
> G726-32
> G726-40
> G729a
> G723

A -d 4 debug trace would be useful, but I think the only common codecs
are G.711a and G.711u...
-- 
 _     Damien Sandras
(o-      
//\    Ekiga Softphone : http://www.ekiga.org/
v_/_   NOVACOM         : http://www.novacom.be/
       FOSDEM          : http://www.fosdem.org/
       SIP Phone       : sip:dsandras at ekiga.net