Re: Gnopernicus

["Adi Dascal" <ad baum ro>]

Hi Richard,

We made a new commit for gnopernicus so please try to use that, BUT before
building it, please erase the ~/.gconf/apps/gnopernicus directory.
If gnopernicus is still not running look into the README file, there is a
note about gconf and try to follow those steps.
Note : We are still in the development stage and lots of things are
changing, so are the gconf files. The ONLY solution for the moment is to
erase them and
gnopernicus will create the new defaults in the ~/.gconf/apps/gnopernicus.

Please announce us about the status.(running or not).

Thanks && regards,
Adi Dascal

----- Original Message -----
From: "Richard Schwerdtfeger" <schwer us ibm com>
To: "Marc Mulcahy" <marc mulcahy sun com>
Cc: <gnome-accessibility-list gnome org>
Sent: Saturday, August 17, 2002 2:20 AM
Subject: Re: Gnopernicus


>
> Marc,
>
> I grabbed the latest version of Gnopernicus from cvs and the latest Gnome
> and Redhat updates. I still get these defects.
>
> The Braille problem seems like a configuration problem. Is there a way to
> change this from the command line since I get no GUI.
>
> Rich
>
>
> Rich Schwerdtfeger
> Senior Technical Staff Member
> IBM Accessibility Center
> Research Division
> EMail/web: schwer us ibm com
>
> "Two roads diverged in a wood, and I -
> I took the one less traveled by, and that has made all the difference.",
> Frost
>
>
>
>
>                       Marc Mulcahy
>                       <marc mulcahy sun        To:       Richard
Schwerdtfeger/Austin/IBM IBMUS, gnome-accessibility-list gnome org
>                       .com>                    cc:
>                                                Subject:  Re: Gnopernicus
>                       08/14/2002 03:40
>                       PM
>
>
>
>
>
> As I said in another private mail to Rich, this looks to me like the
> g_assert bug rearing its ugly head.
>
> Marc
>
> At 03:44 PM 8/13/2002 -0600, Richard Schwerdtfeger wrote:
> >I am getting the following two trap traces when starting gnopernicus.
> >Perhaps someone can tell me how to work around the problem. The first
trap
> >in error.txt talks about trying to get an optical sensor value. Sounds
> like
> >it's trying to gain access to a Braille device. I would like to run with
a
> >speech solution like festival or Via Voice instead.
> >
> >(See attached file: error2.txt)(See attached file: error.txt)
> >
> >
> >Rich Schwerdtfeger
> >Senior Technical Staff Member
> >IBM Accessibility Center
> >Research Division
> >EMail/web: schwer us ibm com
> >
> >"Two roads diverged in a wood, and I -
> >I took the one less traveled by, and that has made all the difference.",
> >Frost
> >
> >
> >Backtrace was generated from 'srcore'
> >
> >[New Thread 1024 (LWP 1833)]
> >0x4083c4b9 in wait3 () from /lib/libc.so.6
> >#0  0x4083c4b9 in wait3 () from /lib/libc.so.6
> >#1  0x408b430c in __DTOR_END__ () from /lib/libc.so.6
> >#2  0x4071f83a in waitpid () from /lib/libpthread.so.0
> >#3  0x400e1d35 in libgnomeui_segv_handle (signum=11) at
> gnome-ui-init.c:620
> >#4  0x4071d307 in pthread_sighandler () from /lib/libpthread.so.0
> >#5  <signal handler called>
> >#6  0x0804e79d in sr_init () at srmain.c:3391
> >#7  0x0804ea28 in main (argc=1, argv=0xbffffae4) at srmain.c:3532
> >#8  0x407a91c4 in __libc_start_main () from /lib/libc.so.6
> >
> >Thread 1 (Thread 1024 (LWP 1833)):
> >#0  0x4083c4b9 in wait3 () from /lib/libc.so.6
> >No symbol table info available.
> >#1  0x408b430c in __DTOR_END__ () from /lib/libc.so.6
> >No symbol table info available.
> >#2  0x4071f83a in waitpid () from /lib/libpthread.so.0
> >No symbol table info available.
> >#3  0x400e1d35 in libgnomeui_segv_handle (signum=11) at
> gnome-ui-init.c:620
> >         estatus = 1082153862
> >         in_segv = 1
> >         pid = 0
> >#4  0x4071d307 in pthread_sighandler () from /lib/libpthread.so.0
> >No symbol table info available.
> >#5  <signal handler called>
> >No symbol table info available.
> >#6  0x0804e79d in sr_init () at srmain.c:3391
> >         msg = (gchar *) 0x407 <Address 0x407 out of bounds>
> >         i = 1031
> >         rn = (ItemNames *) 0xfffffe00
> >         rp = (RolePresentation *) 0x8057e54
> >         pi = (PresentationItem *) 0xfffffe00
> >#7  0x0804ea28 in main (argc=1, argv=0xbffffae4) at srmain.c:3532
> >         argc = 1
> >         argv = (char **) 0xbffffae4
> >         i = 1
> >#8  0x407a91c4 in __libc_start_main () from /lib/libc.so.6
> >No symbol table info available.
> >#0  0x4083c4b9 in wait3 () from /lib/libc.so.6
> >
> >
> >Backtrace was generated from 'gnopernicus'
> >
> >[New Thread 1024 (LWP 1832)]
> >0x408254b9 in wait4 () from /lib/libc.so.6
> >#0  0x408254b9 in wait4 () from /lib/libc.so.6
> >#1  0x4089d30c in __DTOR_END__ () from /lib/libc.so.6
> >#2  0x4070883a in waitpid () from /lib/libpthread.so.0
> >#3  0x400cad35 in libgnomeui_segv_handle (signum=5) at
gnome-ui-init.c:620
> >#4  0x40706307 in pthread_sighandler () from /lib/libpthread.so.0
> >#5  <signal handler called>
> >#6  0x4073877c in g_logv (log_domain=0x0, log_level=G_LOG_LEVEL_ERROR,
> >     format=0x8055bc0 "Failed to get optical sensor value\n",
> > args1=0xbffffa3c)
> >     at gmessages.c:503
> >#7  0x4073882f in g_log (log_domain=0x0, log_level=G_LOG_LEVEL_ERROR,
> >     format=0x8055bc0 "Failed to get optical sensor value\n") at
> > gmessages.c:526
> >#8  0x0804b8f5 in brl_optical_sensor_get () at brlconf.c:626
> >#9  0x0804b014 in brl_setting_init () at brlconf.c:184
> >#10 0x0804a765 in gn_init () at gnopi.c:304
> >#11 0x0804a628 in main (argc=1, argv=0xbffffae4) at gnopi.c:233
> >#12 0x407921c4 in __libc_start_main () from /lib/libc.so.6
> >
> >Thread 1 (Thread 1024 (LWP 1832)):
> >#0  0x408254b9 in wait4 () from /lib/libc.so.6
> >No symbol table info available.
> >#1  0x4089d30c in __DTOR_END__ () from /lib/libc.so.6
> >No symbol table info available.
> >#2  0x4070883a in waitpid () from /lib/libpthread.so.0
> >No symbol table info available.
> >#3  0x400cad35 in libgnomeui_segv_handle (signum=5) at
gnome-ui-init.c:620
> >         estatus = 1082774284
> >         in_segv = 1
> >         pid = 0
> >#4  0x40706307 in pthread_sighandler () from /lib/libpthread.so.0
> >No symbol table info available.
> >#5  <signal handler called>
> >No symbol table info available.
> >#6  0x4073877c in g_logv (log_domain=0x0, log_level=G_LOG_LEVEL_ERROR,
> >     format=0x8055bc0 "Failed to get optical sensor value\n",
> > args1=0xbffffa3c)
> >     at gmessages.c:503
> >         depth = 1
> >         domain = (GLogDomain *) 0x0
> >         log_func = 0x40739100 <g_log_default_handler>
> >         domain_fatal_mask = 5
> >         data = 0x0
> >         test_level = 0
> >         buffer = "Failed to get optical sensor value\n\0
>
>
>
>
>
>
> _______________________________________________
> gnome-accessibility-list mailing list
> gnome-accessibility-list gnome org
> http://mail.gnome.org/mailman/listinfo/gnome-accessibility-list