Re: gestion d'énergie

[René Bantegnie <rene bantegnie free fr>]

Lorsque je dis qu'il ne se passe rien qu'en je clique sur "hiberner" ce n'est pas tout à fait exact :
l'économiseur d'écran se met en fonction
deux secondes après j'ai un écran noir avec quelques messages
et je reviens sur à la boîte de dialogue de l'écran verrouillé
Ci-dessous les log

-- 
René

Sep  1 10:07:36 ubuntu gnome-power-manager: (bantegnie) Hibernation de l'ordinateur car l'utilisateur a cliqué sur hiberner à partir du menu de la zone de notification
Sep  1 10:07:38 ubuntu kernel: [ 2680.638130] skge eth1: disabling interface
Sep  1 10:07:48 ubuntu kernel: [ 2690.390544] ACPI: PCI interrupt for device 0000:00:04.0 disabled
Sep  1 10:07:48 ubuntu kernel: [ 2690.562417] ACPI: PCI interrupt for device 0000:01:04.0 disabled
Sep  1 10:07:48 ubuntu kernel: [ 2690.601183] ACPI: PCI interrupt for device 0000:01:07.0 disabled
Sep  1 10:07:50 ubuntu kernel: [ 2692.142270] Disabling non-boot CPUs ...
Sep  1 10:07:50 ubuntu kernel: [ 2692.142274] Stopping tasks ... done.
Sep  1 10:07:50 ubuntu kernel: [ 2692.158677] Shrinking memory...  ^H-^Hdone (0 pages freed)
Sep  1 10:07:50 ubuntu kernel: [ 2692.182002] Freed 0 kbytes in 0.02 seconds (0.00 MB/s)
Sep  1 10:07:50 ubuntu kernel: [ 2692.182005] Suspending console(s)
Sep  1 10:07:50 ubuntu kernel: [ 2692.947584] pnp: Device 00:0e disabled.
Sep  1 10:07:50 ubuntu kernel: [ 2692.947841] pnp: Device 00:0c disabled.
Sep  1 10:07:50 ubuntu kernel: [ 2692.948044] pnp: Device 00:0b disabled.
Sep  1 10:07:50 ubuntu kernel: [ 2692.948247] pnp: Device 00:0a disabled.
Sep  1 10:07:50 ubuntu kernel: [ 2692.948287] NVRM: RmPowerManagement: 3
Sep  1 10:07:50 ubuntu kernel: [ 2693.052671] ACPI: PCI interrupt for device 0000:01:0b.0 disabled
Sep  1 10:07:50 ubuntu kernel: [ 2693.052782] ohci1394 does not fully support suspend and resume yet
Sep  1 10:07:50 ubuntu kernel: [ 2693.052785] ieee1394: hpsb_bus_reset called while bus reset already in progress
Sep  1 10:07:50 ubuntu kernel: [ 2693.075243] ACPI: PCI interrupt for device 0000:00:06.0 disabled
Sep  1 10:07:50 ubuntu kernel: [ 2693.075360] ACPI: PCI interrupt for device 0000:00:02.2 disabled
Sep  1 10:07:50 ubuntu kernel: [ 2693.091043] ACPI: PCI interrupt for device 0000:00:02.1 disabled
Sep  1 10:07:50 ubuntu kernel: [ 2693.107025] ACPI: PCI interrupt for device 0000:00:02.0 disabled
Sep  1 10:07:50 ubuntu kernel: [ 2693.123342] swsusp: critical section: 
Sep  1 10:07:50 ubuntu kernel: [ 2693.146627] swsusp: Need to copy 125276 pages
Sep  1 10:07:50 ubuntu kernel: [ 2694.229978] swsusp: critical section/: done (125276 pages copied)
Sep  1 10:07:50 ubuntu kernel: [ 2694.246379] PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
Sep  1 10:07:50 ubuntu kernel: [ 2694.246386] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
Sep  1 10:07:50 ubuntu kernel: [ 2694.262362] PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
Sep  1 10:07:50 ubuntu kernel: [ 2694.262365] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
Sep  1 10:07:50 ubuntu kernel: [ 2694.278347] PCI: Enabling device 0000:00:02.2 (0000 -> 0002)
Sep  1 10:07:50 ubuntu kernel: [ 2694.278350] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18
Sep  1 10:07:50 ubuntu kernel: [ 2694.278466] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 18
Sep  1 10:07:50 ubuntu kernel: [ 2694.345965] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[e1084000-e10847ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
Sep  1 10:07:50 ubuntu kernel: [ 2694.351083] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 20
Sep  1 10:07:50 ubuntu kernel: [ 2694.351131] NVRM: RmPowerManagement: 4
Sep  1 10:07:50 ubuntu kernel: [ 2694.533967] pnp: Device 00:0a activated.
Sep  1 10:07:50 ubuntu kernel: [ 2694.534955] pnp: Device 00:0b activated.
Sep  1 10:07:50 ubuntu kernel: [ 2694.536399] pnp: Device 00:0c activated.
Sep  1 10:07:50 ubuntu kernel: [ 2694.537386] pnp: Device 00:0e activated.
Sep  1 10:07:50 ubuntu kernel: [ 2694.658001] ata2: SATA link down (SStatus 0 SControl 310)
Sep  1 10:07:50 ubuntu kernel: [ 2694.924123] Restarting tasks ... done.
Sep  1 10:07:50 ubuntu kernel: [ 2694.943397] Enabling non-boot CPUs ...
Sep  1 10:07:51 ubuntu kernel: [ 2695.820930] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Sep  1 10:07:51 ubuntu kernel: [ 2695.829605] ata1.00: ata_hpa_resize 1: sectors = 160836480, hpa_sectors = 160836480
Sep  1 10:07:51 ubuntu kernel: [ 2695.837584] ata1.00: ata_hpa_resize 1: sectors = 160836480, hpa_sectors = 160836480
Sep  1 10:07:51 ubuntu kernel: [ 2695.837589] ata1.00: configured for UDMA/100
Sep  1 10:07:51 ubuntu kernel: [ 2695.838357] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
Sep  1 10:07:51 ubuntu kernel: [ 2695.840719] sda: Write Protect is off
Sep  1 10:07:51 ubuntu kernel: [ 2695.844715] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  1 10:07:51 ubuntu kernel: [ 2695.928644] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
Sep  1 10:07:51 ubuntu kernel: [ 2695.931900] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
Sep  1 10:07:52 ubuntu kernel: [ 2696.496794] eth0: no link during initialization.
Sep  1 10:07:52 ubuntu kernel: [ 2696.496997] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep  1 10:07:52 ubuntu kernel: [ 2696.497254] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
Sep  1 10:07:52 ubuntu kernel: [ 2696.510664] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 19
Sep  1 10:07:52 ubuntu kernel: [ 2696.510827] skge 1.9 addr 0xe0000000 irq 19 chip Yukon-Lite rev 7
Sep  1 10:07:52 ubuntu kernel: [ 2696.520079] skge eth1: addr 00:0e:a6:5c:81:f8
Sep  1 10:07:52 ubuntu kernel: [ 2696.525743] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 21
Sep  1 10:07:52 ubuntu kernel: [ 2696.525751] rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com
Sep  1 10:07:52 ubuntu dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
Sep  1 10:07:52 ubuntu kernel: [ 2696.580787] skge eth1: enabling interface
Sep  1 10:07:52 ubuntu kernel: [ 2696.584208] ADDRCONF(NETDEV_UP): eth1: link is not ready
Sep  1 10:07:52 ubuntu kernel: [ 2696.593880] bridge-ra0: is a Wireless Adapter
Sep  1 10:07:52 ubuntu dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.reason
Sep  1 10:07:55 ubuntu kernel: [ 2697.728791] input: Power Button (FF) as /class/input/input8
Sep  1 10:07:55 ubuntu kernel: [ 2697.744134] ACPI: Power Button (FF) [PWRF]
Sep  1 10:07:55 ubuntu kernel: [ 2697.779127] input: Power Button (CM) as /class/input/input9
Sep  1 10:07:55 ubuntu kernel: [ 2697.779628] ACPI: Power Button (CM) [PWRB]
Sep  1 10:08:03 ubuntu gnome-power-manager: (bantegnie) DBUS timed out, but recovering
Sep  1 10:08:03 ubuntu gnome-power-manager: (bantegnie) Reprise de l'ordinateur