[DL] String additions to 'glib.glib-2-56'

[GNOME Status Pages <noreply gnome org>]

This is an automatic notification from status generation scripts on:
https://l10n.gnome.org.

There have been following string additions to module 'glib.glib-2-56':

+ "  COMMAND   The (optional) command to explain\n"
    + "  FILE      An elf file (a binary or a shared library)\n            or a compiled resource file\n"
    + "  FILE      An elf file (a binary or a shared library)\n"
    + "  KEY       The (optional) key within the schema\n"
    + "  KEY       The key within the schema\n"
    + "  PATH      A resource path\n"
    + "  PATH      An (optional) resource path (may be partial)\n"
    + "  SCHEMA    The name of the schema\n  PATH      The path, for relocatable schemas\n"
    + "  SCHEMADIR A directory to search for additional schemas\n"
    + "  SECTION   An (optional) elf section name\n"
    + "  VALUE     The value to set\n"
    + " (invalid encoding)"
    + " and --strict was specified; exiting.\n"
    + "%.1f EB"
    + "%.1f Eb"
    + "%.1f EiB"
    + "%.1f Eib"
    + "%.1f GB"
    + "%.1f Gb"
    + "%.1f GiB"
    + "%.1f Gib"
    + "%.1f KB"
    + "%.1f KiB"
    + "%.1f Kib"
    + "%.1f MB"
    + "%.1f Mb"
    + "%.1f MiB"
    + "%.1f Mib"
    + "%.1f PB"
    + "%.1f Pb"
    + "%.1f PiB"
    + "%.1f Pib"
    + "%.1f TB"
    + "%.1f Tb"
    + "%.1f TiB"
    + "%.1f Tib"
    + "%.1f kB"
    + "%.1f kb"
    + "%s bit"/"%s bits"
    + "%s byte"/"%s bytes"
    + "%s command requires an application id to directly follow\n\n"
    + "%s filetype"
    + "%s type"
    + "%s: overwrite “%s”? "
    + "%u bit"/"%u bits"
    + "%u byte"/"%u bytes"
    + "'%s' is not a valid character following a '<' character; it may not begin an element name"
    + "'%s' is not a valid character following the characters '</'; '%s' may not begin an element name"
    + "'%s' is not a valid character following the close element name '%s'; the allowed character is '>'"
    + "'%s' is not a valid name"
    + "'%s' is not a valid name: '%c'"
    + "(*MARK) must have an argument"
    + "(*VERB) not recognized"
    + "(?R or (?[+-]digits must be followed by )"
    + "(Additionally, releasing the lock for “%s” also failed: %s) "
    + "(Type any character to close this window)\n"
    + ") without opening ("
    + "--strict was specified; exiting.\n"
    + "; ignoring override for this key.\n"
    + "<%s id='%s'> already specified"
    + "<%s id='%s'> not (yet) defined."
    + "<%s> contains a string not in <choices>"
    + "<%s> contains string not in the specified flags type"
    + "<%s> is not a valid member of the specified enumerated type"
    + "<%s> is not contained in the specified range"
    + "<%s> must contain at least one <value>"
    + "<alias value='%s'/> already specified"
    + "<alias value='%s'/> given when <choice value='%s'/> was already given"
    + "<alias value='%s'/> given when “%s” is already a member of the enumerated type"
    + "<aliases> already specified for this key"
    + "<aliases> can only be specified for keys with enumerated or flags types or after <choices>"
    + "<aliases> must contain at least one <alias>"
    + "<child name='%s'> already specified"
    + "<choice value='%s'/> already given"
    + "<choices> already specified for this key"
    + "<choices> cannot be specified for keys tagged as having an enumerated type"
    + "<choices> must contain at least one <choice>"
    + "<choices> not allowed for keys of type “%s”"
    + "<key name='%s'> already specified"
    + "<key name='%s'> shadows <key name='%s'> in <schema id='%s'>; use <override> to modify value"
    + "<override name='%s'> already specified"
    + "<override> given but schema isn’t extending anything"
    + "<range/> already specified for this key"
    + "<range> not allowed for keys of type “%s”"
    + "<range> specified minimum is greater than maximum"
    + "<schema id='%s' list-of='%s'> extends <schema id='%s' list-of='%s'> but “%s” does not extend “%s”"
    + "<schema id='%s'> already specified"
    + "<schema id='%s'> extends not yet existing schema “%s”"
    + "<schema id='%s'> is a list, extending <schema id='%s'> which is not a list"
    + "<schema id='%s'> is list of not yet existing schema “%s”"
    + "<value nick='%s'/> already specified"
    + "A bookmark for URI “%s” already exists"
    + "A path, if given, must begin and end with a slash"
    + "A subtree is already exported for %s"
    + "ACTION"
    + "APPID ACTION [PARAMETER]"
    + "APPID [FILE…]"
    + "APPID"
    + "ATTRIBUTE"
    + "ATTRIBUTES"
    + "Abort on any errors in schemas"
    + "Abstract UNIX domain socket addresses not supported on this system"
    + "Abstract name space not supported"
    + "Activate an action"
    + "Added socket is closed"
    + "Address element “%s” does not contain a colon (:)"
    + "Address has bits set beyond prefix length"
    + "Address to listen on"
    + "Address “%s” is invalid (need exactly one of path, tmpdir or abstract keys)"
    + "Amount of memory required to process the write is larger than available address space"
    + "An object is already exported for the interface %s at %s"
    + "Anonymous access denied"
    + "Append to end of file"
    + "Application Options:"
    + "Application identifier in D-Bus format (eg: org.example.viewer)"
    + "Application information lacks an identifier"
    + "Arguments:\n"
    + "Attribute not specified"
    + "Attribute value must be non-NULL"
    + "Attribute “%s” of element “%s” not found"
    + "Backup existing destination files"
    + "Backup file creation failed"
    + "Bad HTTP proxy reply"
    + "C identifier name used for the generated source code"
    + "COMMAND"
    + "Cancellable initialization not supported"
    + "Cancelled via GDBusAuthObserver::authorize-authenticated-peer"
    + "Cannot add keys to a “list-of” schema"
    + "Cannot autolaunch D-Bus without X11 $DISPLAY"
    + "Cannot be a list of a schema with a path"
    + "Cannot convert fallback “%s” to codeset “%s”"
    + "Cannot decrypt PEM-encoded private key"
    + "Cannot deserialize message: "
    + "Cannot determine bus address because the DBUS_STARTER_BUS_TYPE environment variable is not set"
    + "Cannot determine bus address from DBUS_STARTER_BUS_TYPE environment variable - unknown value '%s'"
    + "Cannot determine bus address from DBUS_STARTER_BUS_TYPE environment variable — unknown value “%s”"
    + "Cannot determine session bus address (not implemented for this OS)"
    + "Cannot extend a schema with a path"
    + "Cannot invoke method; proxy is for a well-known name without an owner and proxy was constructed with 
the G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START flag"
    + "Cannot listen on unsupported transport “%s”"
    + "Cannot parse double value “%s” for %s"
    + "Cannot parse integer value “%s” for %s"
    + "Cannot serialize message: "
    + "Cannot set permissions on symlinks"
    + "Cannot spawn a message bus when setuid"
    + "Cannot spawn a message bus without a machine-id: "
    + "Cannot specify nonce file when creating a server"
    + "Cannot truncate GBufferedInputStream"
    + "Cannot truncate GMemoryInputStream"
    + "Cannot use datagram operations on a non-datagram socket."
    + "Cannot use datagram operations on a socket with a timeout set."
    + "Can’t copy directory over directory"
    + "Can’t copy over directory"
    + "Can’t copy special file"
    + "Can’t create user MIME configuration folder %s: %s"
    + "Can’t create user application configuration folder %s: %s"
    + "Can’t create user desktop file %s"
    + "Can’t do a raw read in g_io_channel_read_line_string"
    + "Can’t do a raw read in g_io_channel_read_to_end"
    + "Can’t handle the supplied version of the icon encoding"
    + "Can’t handle version %d of GEmblem encoding"
    + "Can’t handle version %d of GEmblemedIcon encoding"
    + "Can’t handle version %d of GFileIcon encoding"
    + "Can’t handle version %d of GThemedIcon encoding"
    + "Can’t move directory over directory"
    + "Can’t recursively copy directory"
    + "Can’t rename file, filename already exists"
    + "Can’t rename root directory"
    + "Channel terminates in a partial character"
    + "Character out of range for UTF-16"
    + "Character out of range for UTF-8"
    + "Character reference '%-.*s' does not encode a permitted character"
    + "Character reference did not end with a semicolon; most likely you used an ampersand character without 
intending to start an entity - escape ampersand as &amp;"
    + "Check if KEY is writable"
    + "Child process exited abnormally"
    + "Child process exited with code %ld"
    + "Child process killed by signal %ld"
    + "Child process stopped by signal %ld"
    + "Commands:"
    + "Commands:\n  help         Shows this information\n  introspect   Introspect a remote object\n  monitor 
     Monitor a remote object\n  call         Invoke a method on a remote object\n  emit         Emit a 
signal\n  wait         Wait for a bus name to appear\n\nUse “%s COMMAND --help” to get help on each 
command.\n"
    + "Commands:\n"
    + "Compile a resource specification into a resource file.\nResource specification files have the 
extension .gresource.xml,\nand the resource file have the extension called .gresource."
    + "Compile all GSettings schema files into a schema cache.\nSchema files are required to have the 
extension .gschema.xml,\nand the cache file is called gschemas.compiled."
    + "Concatenate files and print to standard output."
    + "Concatenate files to standard output"
    + "Connect to given D-Bus address"
    + "Connect to the session bus"
    + "Connect to the system bus"
    + "Connection Endpoint Options:"
    + "Connection in progress"
    + "Connection refused through SOCKSv5 proxy."
    + "Connection through SOCKSv4 server was rejected"
    + "Containing mount does not exist"
    + "Containing mount for file %s not found"
    + "Conversion from character set “%s” to “%s” is not supported"
    + "Copy (reflink/clone) between mounts is not supported"
    + "Copy (reflink/clone) is not supported or didn’t work"
    + "Copy (reflink/clone) is not supported or invalid"
    + "Copy one or more files from SOURCE to DESTINATION."
    + "Copy one or more files"
    + "Copy with file"
    + "Could not allocate %lu byte to read file “%s”"/"Could not allocate %lu bytes to read file “%s”"
    + "Could not connect to %s: "
    + "Could not connect to proxy server %s: "
    + "Could not connect: "
    + "Could not create network monitor: "
    + "Could not create network monitor: %s"
    + "Could not determine the disk usage of %s: %s"
    + "Could not get network status: "
    + "Could not load schemas from %s: %s\n"
    + "Could not open converter from “%s” to “%s”"
    + "Could not open converter from “%s” to “%s”: %s"
    + "Could not parse PEM-encoded certificate"
    + "Could not parse PEM-encoded private key"
    + "Could not parse “%s” as IP address mask"
    + "Create directories"
    + "Create directories."
    + "Create parent directories"
    + "Credentials spoofing is not possible on this OS"
    + "Custom definition for %s"
    + "DEFINE group contains more than one branch"
    + "DESTINATION"
    + "DEVICE"
    + "DIRECTORY"
    + "DTLS support is not available"
    + "Default application for “%s”: %s\n"
    + "Delete one or more files"
    + "Delete the given files."
    + "Desktop file didn’t specify Exec field"
    + "Destination %s is not a directory"
    + "Destination name to introspect"
    + "Destination name to invoke method on"
    + "Destination name to monitor"
    + "Didn’t find cookie with id %d in the keyring at “%s”"
    + "Do not enforce key name restrictions"
    + "Do not write the gschema.compiled file"
    + "Document ended unexpectedly after the equals sign following an attribute name; no attribute value"
    + "Document ended unexpectedly inside a comment or processing instruction"
    + "Document ended unexpectedly inside an attribute name"
    + "Document ended unexpectedly inside an element name"
    + "Document ended unexpectedly inside an element-opening tag."
    + "Document ended unexpectedly inside the close tag for element '%s'"
    + "Document ended unexpectedly just after an open angle bracket '<'"
    + "Document ended unexpectedly while inside an attribute value"
    + "Document ended unexpectedly with elements still open - '%s' was the last element opened"
    + "Document ended unexpectedly, expected to see a close angle bracket ending the tag <%s/>"
    + "Document must begin with an element (e.g. <book>)"
    + "Document was empty or contained only whitespace"
    + "Don’t automatically create and register resource"
    + "Don’t export functions; declare them G_GNUC_INTERNAL"
    + "Don’t follow symbolic links"
    + "Don’t use copy and delete fallback"
    + "Double value “%s” for %s out of range"
    + "ERROR message: REPLY_SERIAL or ERROR_NAME header field is missing"
    + "ETAG"
    + "Eject"
    + "Element '%s' was closed, but the currently open element is '%s'"
    + "Element '%s' was closed, no element is currently open"
    + "Element <%s> not allowed at the top level"
    + "Element <%s> not allowed at toplevel"
    + "Element <%s> not allowed inside <%s>"
    + "Element <default> is required in <key>"
    + "Embedded NUL byte in conversion input"
    + "Embedded NUL byte in conversion output"
    + "Emit a signal."
    + "Empty entity '&;' seen; valid entities are: &amp; &quot; &lt; &gt; &apos;"
    + "Empty names are not permitted"
    + "Empty path given.\n"
    + "Empty schema name given\n"
    + "Empty string is not a number"
    + "Empty the trash"
    + "Encountered array of length %u byte. Maximum length is 2<<26 bytes (64 MiB)."/"Encountered array of 
length %u bytes. Maximum length is 2<<26 bytes (64 MiB)."
    + "Encountered array of type “a%c”, expected to have a length a multiple of %u bytes, but found to be %u 
bytes in length"
    + "Enter GApplication service mode (use from D-Bus service files)"
    + "Entity did not end with a semicolon; most likely you used an ampersand character without intending to 
start an entity - escape ampersand as &amp;"
    + "Entity name '%-.*s' is not known"
    + "Enumerator is closed"
    + "Error accepting connection: %s"
    + "Error auto-launching: "
    + "Error binding to address: %s"
    + "Error calling StartServiceByName for %s: "
    + "Error checking if SO_PASSCRED is enabled for socket: %s"
    + "Error closing (unlinked) lock file “%s”: %s"
    + "Error closing file descriptor: %s"
    + "Error closing file: %s"
    + "Error closing handle: %s"
    + "Error closing socket: %s"
    + "Error compressing file %s"
    + "Error connecting: %s\n"
    + "Error creating backup copy: %s"
    + "Error creating directory %s: %s"
    + "Error creating directory “%s”: %s"
    + "Error creating lock file “%s”: %s"
    + "Error deleting stale lock file “%s”: %s"
    + "Error deserializing GVariant with type string “%s” from the D-Bus wire format"
    + "Error during conversion: %s"
    + "Error enabling SO_PASSCRED: %s"
    + "Error flushing connection: %s\n"
    + "Error getting filesystem info for %s: %s"
    + "Error in address “%s” — the family attribute is malformed"
    + "Error in address “%s” — the host attribute is missing or malformed"
    + "Error in address “%s” — the noncefile attribute is missing or malformed"
    + "Error in address “%s” — the port attribute is malformed"
    + "Error in address “%s” — the port attribute is missing or malformed"
    + "Error in address “%s” — the unix transport requires exactly one of the keys “path” or “abstract” to be 
set"
    + "Error joining multicast group: %s"
    + "Error leaving multicast group: %s"
    + "Error making symbolic link %s: %s"
    + "Error moving file %s: %s"
    + "Error on line %d char %d: "
    + "Error on line %d: %s"
    + "Error opening directory “%s”: %s"
    + "Error opening file %s: %s"
    + "Error opening file “%s”: %s"
    + "Error opening keyring “%s” for reading: "
    + "Error opening keyring “%s” for writing: "
    + "Error opening nonce file “%s”: %s"
    + "Error parsing introspection XML: %s\n"
    + "Error parsing option %s"
    + "Error parsing parameter %d of type “%s”: %s\n"
    + "Error parsing parameter %d: %s\n"
    + "Error reading file %s: %s"
    + "Error reading file “%s”: %s"
    + "Error reading from file descriptor: %s"
    + "Error reading from file: %s"
    + "Error reading from handle: %s"
    + "Error reading from nonce file “%s”, expected 16 bytes, got %d"
    + "Error reading from nonce file “%s”: %s"
    + "Error reading from standard input"
    + "Error receiving data: %s"
    + "Error receiving message: %s"
    + "Error removing file %s: %s"
    + "Error removing old backup link: %s"
    + "Error removing old file: %s"
    + "Error removing target file: %s"
    + "Error renaming file %s: %s"
    + "Error renaming temporary file: %s"
    + "Error resolving “%s”"
    + "Error resolving “%s”: %s"
    + "Error return with body of type “%s”"
    + "Error return with empty body"
    + "Error reverse-resolving “%s”: %s"
    + "Error seeking in file: %s"
    + "Error sending credentials: "
    + "Error sending data: %s"
    + "Error sending message: %s"
    + "Error serializing GVariant with type string “%s” to the D-Bus wire format"
    + "Error setting SELinux context: %s"
    + "Error setting extended attribute “%s”: %s"
    + "Error setting modification or access time: %s"
    + "Error setting owner: %s"
    + "Error setting permissions: %s"
    + "Error setting property '%s': Expected type '%s' but got '%s'"
    + "Error setting symlink: %s"
    + "Error setting symlink: file is not a symlink"
    + "Error spawning command line “%s”: "
    + "Error splicing file: %s"
    + "Error trashing file %s: %s"
    + "Error truncating file: %s"
    + "Error unescaping key or value in Key/Value pair %d, “%s”, in address element “%s”"
    + "Error unlinking lock file “%s”: %s"
    + "Error when getting information for directory “%s”: %s"
    + "Error when getting information for file descriptor: %s"
    + "Error when getting information for file “%s”: %s"
    + "Error while compiling regular expression %s at char %d: %s"
    + "Error while disabling SO_PASSCRED: %s"
    + "Error while matching regular expression %s: %s"
    + "Error while optimizing regular expression %s: %s"
    + "Error while parsing replacement text “%s” at char %lu: %s"
    + "Error writing contents of nonce file “%s” to stream:"
    + "Error writing nonce file at “%s”: %s"
    + "Error writing to file descriptor: %s"
    + "Error writing to file: %s"
    + "Error writing to handle: %s"
    + "Error writing to stdout"
    + "Error: %s is not a valid bus name\n"
    + "Error: %s is not a valid interface name\n"
    + "Error: %s is not a valid member name\n"
    + "Error: %s is not a valid name\n"
    + "Error: %s is not a valid object path\n"
    + "Error: %s is not a valid unique bus name.\n"
    + "Error: %s is not a valid well-known bus name.\n"
    + "Error: %s\n"
    + "Error: A service to activate for must be specified.\n"
    + "Error: A service to wait for must be specified.\n"
    + "Error: Destination is not specified\n"
    + "Error: Method name is not specified\n"
    + "Error: Method name “%s” is invalid\n"
    + "Error: Object path is not specified\n"
    + "Error: Signal name is not specified\n"
    + "Error: Signal name “%s” is invalid\n"
    + "Error: Too many arguments.\n"
    + "Error: can’t monitor a non-message-bus connection\n"
    + "Etag not available\n"
    + "Exactly one of “type”, “enum” or “flags” must be specified as an attribute to <key>"
    + "Exhausted all available authentication mechanisms (tried: %s) (available: %s)"
    + "Existing file “%s” could not be removed: g_unlink() failed: %s"
    + "Expected NUL byte after the string “%s” but found byte %d"
    + "Expected a GEmblem for GEmblemedIcon"
    + "Expected valid UTF-8 string but found invalid bytes at byte offset %d (length of string is %d). The 
valid UTF-8 string up until that point was “%s”"

Note that this doesn't directly indicate a string freeze break, but it
might be worth investigating.
https://git.gnome.org/browse/glib/log/?h=glib-2-56