Re: Problems with file conduit and Treo 680
- From: Adam C Powell IV <hazelsct debian org>
- To: "The PalmOS< tm> integration pacakge" <gnome-pilot-list gnome org>
- Subject: Re: Problems with file conduit and Treo 680
- Date: Sun, 23 Sep 2007 18:44:16 -0400
On Sun, 2007-09-23 at 21:56 +0100, Matt Davey wrote:
> > I have the same timing issues with a Treo 700p, but worse, because if I
> > don't pause the gpilotd daemon before plugging in to charge (no
> > hotsync), it infinite-loops. With pilot-xfer, I need to hit hotsync 1-5
> > seconds before running pilot-xfer. This is with libusb instead of
> > visor, I can't get visor to work at all with the 700p.
>
> Adam,
>
> Do you get into an infinite loop if you start pilot-xfer before plugging
> in the 700p? If not, we should try to find out how gpilotd gets
> stuck. Have you tried attaching with gdb and seeing what bit of code
> it is in via a stack trace?
>
> I guess the pilot-link people should try to see how they can distinguish
> the charging connection from a sync attempt...
Okay, with gpilotd and the applet dead, I run "pilot-xfer -p usb: -l",
and strace (attached) gets to the "futex(... NULL". Then I hit hotsync
on the 700p, and pilot-xfer goes up to max CPU but with no further
strace output.
Then I do "gdb pilot-xfer" and "run -p usb: -l", wait a bit, and again
the pilot-xfer process goes to max CPU. Hmm, oh well, no debugging
symbols, this is Debian. :-(
I can try rebuilding pilot-link with dh_strip removed, but don't have
time now. Does the strace output help?
-Adam
--
GPG fingerprint: D54D 1AEE B11C CE9B A02B C5DD 526F 01E8 564E E4B6
Engineering consulting using open source tools
http://www.opennovation.com/
execve("/usr/bin/pilot-xfer", ["pilot-xfer", "-p", "usb:", "-l"], [/* 44 vars */]) = 0
uname({sys="Linux", node="doorstop", ...}) = 0
brk(0) = 0x8056000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f19000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f18000
open("/home/hazelsct/i486-linux/lib/tls/i686/cmov/libpisock.so.9", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/home/hazelsct/i486-linux/lib/tls/i686/cmov", 0xbf823148) = -1 ENOENT (No such file or directory)
open("/home/hazelsct/i486-linux/lib/tls/i686/libpisock.so.9", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/home/hazelsct/i486-linux/lib/tls/i686", 0xbf823148) = -1 ENOENT (No such file or directory)
open("/home/hazelsct/i486-linux/lib/tls/cmov/libpisock.so.9", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/home/hazelsct/i486-linux/lib/tls/cmov", 0xbf823148) = -1 ENOENT (No such file or directory)
open("/home/hazelsct/i486-linux/lib/tls/libpisock.so.9", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/home/hazelsct/i486-linux/lib/tls", 0xbf823148) = -1 ENOENT (No such file or directory)
open("/home/hazelsct/i486-linux/lib/i686/cmov/libpisock.so.9", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/home/hazelsct/i486-linux/lib/i686/cmov", 0xbf823148) = -1 ENOENT (No such file or directory)
open("/home/hazelsct/i486-linux/lib/i686/libpisock.so.9", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/home/hazelsct/i486-linux/lib/i686", 0xbf823148) = -1 ENOENT (No such file or directory)
open("/home/hazelsct/i486-linux/lib/cmov/libpisock.so.9", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/home/hazelsct/i486-linux/lib/cmov", 0xbf823148) = -1 ENOENT (No such file or directory)
open("/home/hazelsct/i486-linux/lib/libpisock.so.9", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/home/hazelsct/i486-linux/lib", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=68969, ...}) = 0
mmap2(NULL, 68969, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f07000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/usr/lib/libpisock.so.9", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20`\0\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=208320, ...}) = 0
mmap2(NULL, 223760, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7ed0000
mmap2(0xb7eff000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2f) = 0xb7eff000
mmap2(0xb7f03000, 14864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f03000
close(3) = 0
open("/home/hazelsct/i486-linux/lib/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/tls/i686/cmov/libpthread.so.0", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240H\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=89370, ...}) = 0
mmap2(NULL, 70104, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7ebe000
mmap2(0xb7ecc000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe) = 0xb7ecc000
mmap2(0xb7ece000, 4568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7ece000
close(3) = 0
open("/home/hazelsct/i486-linux/lib/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/tls/i686/cmov/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240O\1"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=1241392, ...}) = 0
mmap2(NULL, 1247388, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7d8d000
mmap2(0xb7eb4000, 28672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x127) = 0xb7eb4000
mmap2(0xb7ebb000, 10396, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7ebb000
close(3) = 0
open("/home/hazelsct/i486-linux/lib/libusb-0.1.so.4", O_RDONLY) = -1 ENOENT (No such file or directory)
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/libusb-0.1.so.4", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\22"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=28740, ...}) = 0
mmap2(NULL, 31768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7d85000
mmap2(0xb7d8b000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0xb7d8b000
close(3) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7d84000
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7d83000
mprotect(0xb7eb4000, 20480, PROT_READ) = 0
set_thread_area({entry_number:-1 -> 6, base_addr:0xb7d836c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
munmap(0xb7f07000, 68969) = 0
set_tid_address(0xb7d83708) = 14102
rt_sigaction(SIGRTMIN, {0xb7ec24c0, [], SA_SIGINFO}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0xb7ec2420, [], SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
uname({sys="Linux", node="doorstop", ...}) = 0
brk(0) = 0x8056000
brk(0x8077000) = 0x8077000
open("/dev/null", O_RDWR) = 3
open("/dev/bus/usb", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 4
fstat64(4, {st_mode=S_IFDIR|0755, st_size=60, ...}) = 0
fcntl64(4, F_SETFD, FD_CLOEXEC) = 0
getdents64(4, /* 3 entries */, 4096) = 72
close(4) = 0
ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, 0xbf823008) = -1 ENOTTY (Inappropriate ioctl for device)
open("/dev/bus/usb", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 4
fstat64(4, {st_mode=S_IFDIR|0755, st_size=60, ...}) = 0
fcntl64(4, F_SETFD, FD_CLOEXEC) = 0
getdents64(4, /* 3 entries */, 4096) = 72
getdents64(4, /* 0 entries */, 4096) = 0
close(4) = 0
open("/dev/bus/usb/001", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 4
fstat64(4, {st_mode=S_IFDIR|0755, st_size=120, ...}) = 0
fcntl64(4, F_SETFD, FD_CLOEXEC) = 0
getdents64(4, /* 6 entries */, 4096) = 144
open("/dev/bus/usb/001/016", O_RDWR) = 5
ioctl(5, USBDEVFS_CONNECTINFO, 0xbf822f34) = 0
read(5, "\22\1\20\1\0\0\0\0200\10a\0\0\1\1\2\5\1", 18) = 18
read(5, "\t\2.\0\1\1\0\300", 8) = 8
read(5, "\372\t\4\0\0\4\377\0\0\0\7\5\201\2 \0\n\7\5\2\2@\0\0\7"..., 38) = 38
close(5) = 0
open("/dev/bus/usb/001/003", O_RDWR) = -1 EACCES (Permission denied)
open("/dev/bus/usb/001/003", O_RDONLY) = 5
ioctl(5, USBDEVFS_CONNECTINFO, 0xbf822f34) = -1 EPERM (Operation not permitted)
read(5, "\22\1\20\1\0\0\0\10F\10\20A2\1\0\0\0\1", 18) = 18
read(5, "\t\2\'\0\1\1\0\200", 8) = 8
read(5, "\372\t\4\0\0\3\377\377\377\0\7\5\201\2 \0\0\7\5\2\2@\0"..., 31) = 31
close(5) = 0
open("/dev/bus/usb/001/002", O_RDWR) = -1 EACCES (Permission denied)
open("/dev/bus/usb/001/002", O_RDONLY) = 5
ioctl(5, USBDEVFS_CONNECTINFO, 0xbf822f34) = -1 EPERM (Operation not permitted)
read(5, "\22\1\20\1\t\0\0\10Q\4F %\1\0\0\0\1", 18) = 18
read(5, "\t\2\31\0\1\1\0\340", 8) = 8
read(5, "\0\t\4\0\0\1\t\0\0\0\7\5\201\3\1\0\377", 17) = 17
close(5) = 0
open("/dev/bus/usb/001/001", O_RDWR) = -1 EACCES (Permission denied)
open("/dev/bus/usb/001/001", O_RDONLY) = 5
ioctl(5, USBDEVFS_CONNECTINFO, 0xbf822f34) = -1 EPERM (Operation not permitted)
read(5, "\22\1\20\1\t\0\0 \0\0\0\0\6\2\3\2\1\1", 18) = 18
read(5, "\t\2\31\0\1\1\0\340", 8) = 8
read(5, "\0\t\4\0\0\1\t\0\0\0\7\5\201\3\2\0\377", 17) = 17
close(5) = 0
getdents64(4, /* 0 entries */, 4096) = 0
close(4) = 0
open("/dev/bus/usb/001/016", O_RDWR) = 4
ioctl(4, USBDEVFS_IOCTL, 0xbf822f30) = -1 ENOTTY (Inappropriate ioctl for device)
close(4) = 0
open("/dev/bus/usb/001/003", O_RDWR) = -1 EACCES (Permission denied)
open("/dev/bus/usb/001/003", O_RDONLY) = 4
ioctl(4, USBDEVFS_IOCTL, 0xbf822f30) = -1 EPERM (Operation not permitted)
close(4) = 0
open("/dev/bus/usb/001/002", O_RDWR) = -1 EACCES (Permission denied)
open("/dev/bus/usb/001/002", O_RDONLY) = 4
ioctl(4, USBDEVFS_IOCTL, 0xbf822f30) = -1 EPERM (Operation not permitted)
close(4) = 0
open("/dev/bus/usb/001/001", O_RDWR) = -1 EACCES (Permission denied)
open("/dev/bus/usb/001/001", O_RDONLY) = 4
ioctl(4, USBDEVFS_IOCTL, 0xbf822f30) = -1 EPERM (Operation not permitted)
close(4) = 0
open("/dev/bus/usb/001/016", O_RDWR) = 4
ioctl(4, USBDEVFS_CONTROL, 0xbf822ecc) = -1 EPROTO (Protocol error)
ioctl(4, USBDEVFS_CONTROL, 0xbf822ecc) = -1 EPROTO (Protocol error)
ioctl(4, USBDEVFS_CLAIMINTERFACE, 0xbf822fa4) = 0
mmap2(NULL, 8392704, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7582000
mprotect(0xb7582000, 4096, PROT_NONE) = 0
clone(child_stack=0xb7d824c4, flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID|CLONE_DETACHED, parent_tidptr=0xb7d82bf8, {entry_number:6, base_addr:0xb7d82bb0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}, child_tidptr=0xb7d82bf8) = 14103
gettimeofday({1190587079, 259337}, NULL) = 0
futex(0xb7eff724, FUTEX_WAIT, 1, NULL <unfinished ...>
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]