Re: [GnomeMeeting-list] multi point conferences

[Damien Sandras <dsandras seconix com>]

First of all, you should install a newer version of GnomeMeeting, there
have been 2 new versions since then.

I think that your problem is some firewalling problem.
This is the only possible problem.

Disable firewall rules on your computers, some distributions enable
automatic firewalling, and I guess that ports for audio and video
channels are blocked. That means that when the MCU will open the
channels for audio and video to you, it will fail, and you won't receive
anything back...

The green picture seems to be a problem with your webcam driver. It is
most probably fixed in recent releases, but 0.12.2 is more than 6 months
old.

Le ven 26/04/2002 à 10:59, Florian Winger a écrit :
> Hi...
> 
> as I read in this list I have to install OpenMcu to make multi conference
> calls. I´m using Gnomemeeting 0.12.2 ( which works fine for 2 users ) and
> OpenMCU 1.0.12 but I´m not able to set up a call. 
> 
> First I start the OpenMCU (./openmcu --vidoelarge --no-gatekeeper --username
> "Server" --video --defaultroom "Video" --videotransmit)
> then I connect from a different PC (in my own lan) to this Server, which
> recognizes the incoming call:
> 
> Incoming H323 Call from PC 1 [192.168.0.1] has not selected a room.
> Using room Video as the default. Accepting call from PC 1 [192.168.0.1]
> using Gnomemeeting /0.12.2 with room ID Video. Not adding member
> ip$192.168.0.1:32777/4956 to its own list
> Started logical channel: sending MS-GSM {sw}<1>
> Started logical channel: sending H.261-CIF <4>
> Started logical channel: receiving MS-GSM{sw}<2>
> Started logical channel: receiving H.261-CIF<6>
> 
> Video for postion 0: "192.168.0.1"
> Video for postion 1: ""
> Video for postion 2: ""
> Video for postion 3: ""
> 
> Then same precedure with 2nd PC:
> 
> Accepting Call from Rechner 2 [192.168.0.2] using Gnomemeeting /0.12.2 with
> room id Video.
> 
> Video for postion 0: "192.168.0.1"
> Video for postion 1: ""
> Video for postion 2: ""
> Video for postion 3: ""
> 
> sometimes the 2nd PC is recognized:
> Video for postion 0: "192.168.0.1"
> Video for postion 1: "192.168.0.2"
> Video for postion 2: ""
> Video for postion 3: ""
> 
> but always the same problem:
> PC 1 receives for the remote picture just a plain green backround image.
> PC 2 receives a freezed image of its own cam!
> 
> I´m lost, please help me.
> 
> Thanx a lot!
> 
> Regards Flo
> 
> -- 
> GMX - Die Kommunikationsplattform im Internet.
> http://www.gmx.net
> 
> _______________________________________________
> Gnomemeeting-list mailing list
> Gnomemeeting-list gnome org
> http://mail.gnome.org/mailman/listinfo/gnomemeeting-list
> 
-- 
 _	Damien Sandras
(o-	GnomeMeeting - H.323 Video-Conferencing application -
//\		web:  http://www.gnomemeeting.org/
v_/_	FOSDEM 2002  - Free Software and Open Source Developers Meeting -
		web:  http://www.fosdem.org/