Re: [GnomeMeeting-list] dc10+

[Antoine Jacoutot <ajacoutot linuxfr dyndns org>]

Selon Damien Sandras <sandras info ucl ac be>:

> Le lun 26/08/2002 à 13:15, Antoine Jacoutot a écrit :
> > Hi,
> 
> > 
> > Hum... thanks for the very quick answer...
> > Where should I start looking to know what color format is supported by
> > my dc10+ capture card ?
> 
> Driver documentation...

--> I read the entire documentation, and therere's nothing about the color
format... :-(

> > I can't find gconftool-2, I only have gconftool and gconftool-1, can I
> > try with those ?
> 
> Yes, it means you are using an old GnomeMeeting like 0.85 probably.
> 
> > 
> > I just ran a little test with gconftool-1 and here is the output:
> > 
> > gconftool-1 --set "/apps/gnomemeeting/devices/color_format" YUV2
> > --type=string
> > Error setting value: Failed to contact configuration server (a likely
> > cause of this is that you have an existing configuration server (gconfd)
> > running, but it isn't reachable from here - if you're logged in from two
> > machines at once, you may need to enable TCP networking for ORBit)
> > 
> 
> It means gconfd is not reachable. I don't know why though.... It must be
> something related to your config, but I can't help with that...
> Btw YUV2 is not a valid name.

Oops, lot of things to figure out...
Where can I find a valid name, so I'll try them all.

Thanks for helping.

Antoine