Re: [GnomeMeeting-list] No audio with netmeeting



If the druid audio test works and plays your audio after a delay of 5
seconds (the delay is IMPORTANT), my guess would be that the Netmeeting
user is misconfigured :)


Le ven 02/07/2004 à 18:02, Damien Sandras a écrit :
> Le ven 02/07/2004 à 17:17, George Bell a écrit :
> > I have established a call between netmeeting and gnomemeeting, where each side 
> > is receiving video from the other but neither can recieve audio.  The user 
> > running netmeeting is on a completely different network than the user running 
> > gnomemeeting, and each is behind a firewall/NAT router but that does not seem 
> > to be the problem.    The call is initiated by the netmeeting user, and the 
> > General History indicates that the audio codec(MS-GSM) is opened where the 
> > netmeeting was configured to use this codec.  The sound apears to be 
> > configured properly so the problem must be somewhere with the protocol or the 
> > routers.  Running tcpdump on the gnomemeeting side during the call I noticed 
> > UDP packets received from the caller on ports 5004, 49598, and 49600.  This 
> > differs from the UDP ports mentioned in the FAQ:  5000-5007.   Does this 
> > indicate some incompatibility between gnomemeeting and netmeeting?  Is there 
> 
> No, the ports in the FAQ are the ports used by GnomeMeeting, not by
> Netmeeting. Netmeeting can have any port number as source port.
> 
> > some way to get the audio working ?
> > 
> 
> Sure, but you do not give enough information about the problem, so
> helping you is hard. If video is ok, I suppose the firewall and NAT are
> ok, but they might not be.
> 
> > Thanks,
> > 
> > George
> > 
> > _______________________________________________
> > GnomeMeeting-list mailing list
> > GnomeMeeting-list gnome org
> > http://mail.gnome.org/mailman/listinfo/gnomemeeting-list
-- 
 _      Damien Sandras
(o-     GnomeMeeting: http://www.gnomemeeting.org/
//\     FOSDEM 2003:  http://www.fosdem.org
v_/_    H.323 phone:  callto://ils.seconix.com/dsandras seconix com




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]