Re: [GnomeMeeting-list] New on the list, my first question

[Damien Sandras <dsandras seconix com>]

Le dimanche 03 avril 2005 à 16:43 +0200, Dirk a écrit :
> Hi,
> just another short question. After problems with compiling the ixj 
> modules for Mandrake 10.1 i give up and go back to Mandrake9.2 and 
> Gnomemeeting0.98. Compliling works and now i have a loadable ixj module, 
> but i can't place pc2phone calls.  In Gnomemeeting faq i found the ports:
> 389,522,1503, 1720,1731,30000-30010,5000-5016,5020-5023 to work with 


I don't know where 389, 522, 1503 come from. Certainly not from the
GnomeMeeting FAQ.

You can check the ports used by GnomeMeeting 0.98.5 using gconf-editor
because I don't remember them.

> Gnomemeeting. Then i use Ethereal, while running Gnomemeeting it shows 
> me requests to ports: 4979,14103,1884,33162,33163. Now i go to a friend 
> and do a portscan at my pc with running Gnomemeeting, the result was all 
> these ports was closed, only port 1720 was open. Is that right?
> 

Only 1720 is in listening mode. The other ones are source ports.

I have a question for you : do you really want to make PC-To-Phone
calls, or do you really want to use Quicknet hardware?

Because if you only need to do PC-To-Phone calls, you can use
GnomeMeeting 1.2.1 on the latest Mandrake without the need for Quicknet
hardware.

-- 
 _      Damien Sandras
(o-     GnomeMeeting: http://www.gnomemeeting.org/
//\     FOSDEM 2005 : http://www.fosdem.org
v_/_    H.323 phone : callto:ils.seconix.com/dsandras seconix com