Re: [GnomeMeeting-list] [Problem]: The commucation breaks each 20 seconds



Damien Sandras wrote:
> Le lundi 06 juin 2005 à 21:00 +0200, Davi Leal a écrit :
> > Hi Damien,
> >
> >   I have enabled STUN and now it works, both video and sound.
> >
> >
> > Note: Now, when I execute the conf Druid I get:
> >
> >   STUN test result: Cone NAT
>
> which is perfect :)

Unfortunately it stopped to work.  I have not modified anything!. 

I have tried the Configuration Druid again, and now it reports
   STUN test result: Blocked.


How is it possible yesterday it reported "Cone NAT" and today it reports 
"Blocked" ?


I can receive calls but all breaks.

The Note that the SJphone test, calling to the 613, works OK.


Any hint will be welcome.



> > But the Druid select "No" instead "Yes" by default!.
> >
> >
> >
> > P.D.: I use Debian Sarge.
> >
> >
> > Anyway it works now. Thanks Damien,
>
> no problem :)
>
> > Davi
> >
> > Damien Sandras wrote:
> > > Hi Davi,
> > >
> > > Le dimanche 05 juin 2005 à 23:26 +0200, Davi Leal a écrit :
> > > > Hi migras,
> > > >
> > > > Problem: The commucation breaks each 20 seconds.
> > > >
> > > >
> > > > The configuration Druid report: STUN test result: Blocked
> > >
> > > Then your network setup is not correct. However, I have relatively few
> > > info on your setup.
> > >
> > > Notice that I do not see STUN enabled in your General History output.
> > >
> > > > According to the FAQ I have forwarded:
> > > >   TCP port 1720
> > > >   TCP port range [30000-30010]
> > > >   UDP port range [5000-5016]
> > > >   UDP port range [5020-5023]
> > >
> > > Why forwarded? Do you have Symmetric NAT?
> > >
> > > > UDP traffic is OK. I have tested it with SJphone. SJphone works OK.
> > > >
> > > >
> > > > General History
> > > >
> > > > 23:23:53 Started GnomeMeeting 1.2.1 for user davi
> > > > 23:23:55 Updated information on ils.seconix.com
> > > > 23:24:50 Calling
> > > > callto:ils.seconix.com/mail xipperhead com+type=directory 23:24:54
> > > > Opened VIA 8235 for recording with plugin ALSA
> > > > 23:24:54 Opened codec iLBC-13k3{sw} for transmission
> > > > 23:24:54 Opening video device Logitech QuickCam Pro 4000 with plugin
> > > > V4L 23:24:55 Successfully opened video device Logitech QuickCam Pro
> > > > 4000, channel 0
> > > > 23:24:55 Opened codec H.261-QCIF for transmission
> > > > 23:24:55 Connected with xipperhead x using gnomemeeting	1.0.2
> > > > 23:24:55 Opened codec H.261-QCIF for reception
> > > > 23:24:55 Closed codec iLBC-13k3{sw} which was opened for transmission
> > > > 23:24:55 Updated information on ils.seconix.com
> > > > 23:25:26 Closed codec H.261-QCIF which was opened for transmission
> > > > 23:25:26 Closed codec H.261-QCIF which was opened for reception
> > > > 23:25:27 Abnormal call termination
> > > > 23:25:29 Updated information on ils.seconix.com
> > > >
> > > >
> > > > Regards,
> > > > Davi



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]