RE: [GnomeMeeting-list] Opal 2.1.2 fails to build

["George J. Sherwood" <george beernabeer com>]

Thanks that was it.  Used "--disable-iax" and it build fine.

George Sherwood

> -----Original Message-----
> From: gnomemeeting-list-bounces gnome org [mailto:gnomemeeting-list-
> bounces gnome org] On Behalf Of Craig Southeren
> Sent: Thursday, January 19, 2006 7:17 PM
> To: George J. Sherwood; 'GnomeMeeting mailing list'
> Subject: Re: [GnomeMeeting-list] Opal 2.1.2 fails to build
> 
> It looks like your OPAL is somehow configured to include IAX2 support,
> but you do not have the IAX2 files.
> 
> Try adding "--disable-iax" to the configure line for OPAL, or update to
> the latest opal/Makefile.in from CVS where I have added a guard for this
> condition.
> 
>    Craig
> 
> On Thu, 19 Jan 2006 19:12:09 -0500
> "George J. Sherwood" <george beernabeer com> wrote:
> 
> > > -----Original Message-----
> > > From: gnomemeeting-list-bounces gnome org [mailto:gnomemeeting-list-
> > > bounces gnome org] On Behalf Of George J. Sherwood
> > > Sent: Thursday, January 19, 2006 4:29 PM
> > > To: 'GnomeMeeting mailing list'
> > > Subject: [GnomeMeeting-list] Opal 2.1.2 fails to build
> > >
> > > I have been building the opal snapshots for sometime now with no
> problems.
> > > Today when I tried to build opal 2.1.2 it failed with this error:
> > >
> > > g++ -DP_USE_PRAGMA -D_REENTRANT -fPIC -DPIC -DPTRACING
> > > -I/usr/src/opal-2.1.2/include  -DPTRACING -I/usr/share/pwlib//include
> -Os
> > > -march=athlon -mmmx -m3dnow -pipe -Os -felide-constructors -c
> > > /usr/src/opal-2.1.2/src/t38/t38proto.cxx -o
> > > /usr/src/opal-2.1.2/lib/obj_linux_x86_r/t38proto.o
> > > g++ -DP_USE_PRAGMA -D_REENTRANT -fPIC -DPIC -DPTRACING
> > > -I/usr/src/opal-2.1.2/include  -DPTRACING -I/usr/share/pwlib//include
> -Os
> > > -march=athlon -mmmx -m3dnow -pipe -Os -felide-constructors -c
> > > /usr/src/opal-2.1.2/src/t38/h323t38.cxx -o
> > > /usr/src/opal-2.1.2/lib/obj_linux_x86_r/h323t38.o
> > > make[1]: Leaving directory `/usr/src/opal-2.1.2'
> > > make[1]: *** No rule to make target
> > > `/usr/src/opal-2.1.2/lib/obj_linux_x86_r/frame.o', needed by
> > > `/usr/src/opal-2.1.2/lib/libopal_linux_x86_r_s.a'.  Stop.
> > > make: *** [optshared] Error 2
> > >
> > >
> > > Any ideas where to look?  I on the ekiga site I noticed a new build of
> > > pwlib
> > > and opal.  Is openh323 not required any more?
> >
> > As a point of reference I am able to build the current opal snapshot, of
> > course I can't build ikiga 1.99.0 since it requires opal 2.1.2
> >
> > George Sherwood
> >
> > _______________________________________________
> > GnomeMeeting-list mailing list
> > GnomeMeeting-list gnome org
> > http://mail.gnome.org/mailman/listinfo/gnomemeeting-list
> 
> 
> -----------------------------------------------------------------------
>  Craig Southeren      craigs postincrement com / craigs voxgratia org
> 
>  Phone:  +61 243654666      ICQ: #86852844
>  Fax:    +61 243673140      MSN: craig_southeren hotmail com
>  Mobile: +61 417231046   Jabber: craigs jabber voxgratia org
> 
>  Post Increment - Consulting & Services    http://www.postincrement.com
>  Vox Gratia - The Open Source VoIP portal  http://www.voxgratia.org
>  VoIP products                             http://www.sunkom.com.au
> 
> _______________________________________________
> GnomeMeeting-list mailing list
> GnomeMeeting-list gnome org
> http://mail.gnome.org/mailman/listinfo/gnomemeeting-list