Re: [GnomeMeeting-list] V4L2 webcam not found during initial config assistant

[Damien Sandras <dsandras seconix com>]

Try as root to make sure there are no perms problem...

Le dimanche 16 juillet 2006 à 23:40 -0500, Seb a écrit :
> On Sun, 16 Jul 2006 09:19:29 -0500,
> "RazaMetaL | Only The Good Die Young" <razametal gmail com> said:
> 
> [...]
> 
> > Is your cam detected by linux ? show us the dmesg output after the cam
> > is connected.
> 
> Sure, here it is:
> 
> 
> $ dmesg | tail
> usb 1-2: Device /dev/video0 is busy...
> usb 1-2: USB disconnect, address 5
> usb 1-2: Disconnecting SN9C10x PC Camera...
> usb 1-2: V4L2 device /dev/video0 deregistered
> usb 1-2: new full speed USB device using uhci_hcd and address 9
> usb 1-2: SN9C10[12] PC Camera Controller detected (vid/pid 0x0C45/0x6029)
> usb 1-2: PAS106B image sensor detected
> usb 1-2: Initialization succeeded
> usb 1-2: V4L2 device registered as /dev/video0
> usb 1-2: Optional device control through 'sysfs' interface ready
> 
> 
> Thanks,
> 
-- 
 _      Damien Sandras
(o-     
//\     Ekiga Softphone: http://www.ekiga.org/
v_/_    FOSDEM 2006    : http://www.fosdem.org/
        SIP Phone      : sip:dsandras ekiga net
                         sip:600000 ekiga net