[GnomeMeeting-list] Ekiga && video conferencing system Polycom VSX.7000

[Matthias Apitz <guru Sisis de>]

Hello,

We've in our company (and in our partners as well) the above VC system
and I tried today morning a call from Ekiga 2.0.2 (compiled from sources)
to it by just entering the URL

	h323:10.0.1.40

the IP 10.0.1.40 is the LAN addr of the VSX 7000. The call comes up
in the VSX and I accept the micro button of it to switch micro on.
I can hear the audio send to the VSX 7000 in the loudspeaker of the
VSX 7000, but not other way around. My still picture of the Ekiga
is not shown in the VSX 7000 and I don't see in Ekiga what the cam
of the VSX 7000 should deliver (and normaly does when I call our
partners). In Ekiga it says

Video: Out: PCMU/H261 In: PCMU/
Audio: Out: PCMU/H261 In: PCMU/

>From the TCPDUMP I can see that the call is made to port 1720
and later is a second channel established to port 2542, both from
my IP (193.31.10.34) to 10.0.1.40.

When I terminate the call Ekiga freezes. What I'm doing wrong?

	matthias
-- 
Matthias Apitz
Manager Technical Support - OCLC PICA GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <m apitz oclcpica org> - w http://www.oclcpica.org/ http://guru.UnixLand.de/