Re: [GnomeMeeting-list] Re. Require Help - Gnome Meeting compilation

[Damien Sandras <dsandras seconix com>]

Le mercredi 15 mars 2006 à 19:06 +0000, dal roth5 a écrit :
> Hello there.
> 
> I have the same problem as Srikanth.R. Obviously you guys must be compiling
> all day long without difficulty, and doubtless many others are too; so
> Srikanth and I must be doing something wrong. For the life of me though I
> can't see it.
> 
> My platform is Linux 2.6.12-12mdk i686 Intel(R) Pentium(R) 4 CPU 1400MHz
> (Mandriva 2006).
> 
> I don't have on my system the pwlib-devel or opal-devel packages because the
> above FAQ page doesn't mention them. They were mentioned in a previous post 
> by Iason Antipariotis (who suggested removing them anyway).
> 
> First off, I followed the instructions here:
> http://www.gnomemeeting.org/faq/x114.html which mentions the OpenLDAP
> library and the SDL library, so I installed:
> libldap2.3_0-devel-2.3.6-4mdk.rpm
> libldap2.3_0-2.3.6-4mdk.rpm
> libldap2.3_0-static-devel-2.3.6-4mdk.rpm
> and
> libSDL1.2-1.2.8-5mdk.rpm
> libSDL1.2-devel-1.2.8-5mdk.rpm
> libSDL1.2-video-ggi-1.2.8-5mdk.rpm
> libSDL1.2-video-directfb-1.2.8-5mdk.rpm.
> 
> Then I downloaded the 3 source packages ekiga-2.0.1.tar.gz,
> opal-2.2.1.tar.gz and pwlib-1.10.0.tar.gz from here:
> http://www.ekiga.org/index.php?rub=5&path=sources/sources and untarred them.
> 
> Then for pwlib I did:
> ./configure --prefix=/usr --enable-plugins --disable-oss --enable-v4l2 &&
> make && make install
> It compiled and installed cleanly.
> 
> Then for Opal I did:
> ./configure --prefix=/usr && make && make install
> It too compiled and installed cleanly.
> 
> Finally for ekiga I did:
> ./configure --prefix=/usr --sysconfdir=/etc && make && make install
> 
> It barfed in the configuration, saying, "error: Sorry but the PWLib version
> you are using doesn't support LDAP".
> 
> I've attached a gzip of the config log; can one of you help me please? I'd
> really like to try Ekiga, but at the moment I'm rather tearing my hair out
> trying to get it built! :) Thank you.
> 

check if pwlib detected openldap or not:

grep P_LDAP CVS/pwlib/include/ptbuildopts.h
#define P_LDAP 1

If you do not get this as result, then it was not detected, for some
reason. If it is the case, check pwlib's config.log.

What I would suggest is "make uninstall" for everything, and install our
binaries from ekiga.org.
-- 
 _      Damien Sandras
(o-     
//\     Ekiga Softphone: http://www.ekiga.org/
v_/_    FOSDEM 2006    : http://www.fosdem.org/
        SIP Phone      : sip:dsandras ekiga net
                         sip:600000 ekiga net