Re: [gtk-osx-users] High Sierra issues

[John Ralls <jralls ceridwen us>]

Miroslav,

Well, I can easily add your pixman patch if you'll do a PR. I've hit the "six" issue but with gtk-doc rather 
than glib. I'm not sure why I didn't hit it this time, maybe PyPI is installing it somewhere global instead 
of into $PREFIX. The problem with it is that I haven't figured out a good way to handle PyPI in jhbuild. I've 
experimentally added a couple of modules by tarball reference in unstable, but it's a PITA because they have 
ugly URIs and PyPI doesn't keep old releases so it breaks every time there's a new package.

Regards,
John Ralls


> On Jun 2, 2018, at 10:49 AM, Miroslav Rajcic <mrajcic hotmail com> wrote:
>
> Thanks John,
>
> I've re-added the "python" to the list of packages to be built and replaced the wrong GTK2-based theme 
> package with the correct one for GTK3 (meta-gtk-osx-gtk3-core-themes).
>
> The build works OK now with two issues remaining, but I have workarounds for these:
>       • First issue is that glib build fails with the error that "six" python module is missing. I've fixed 
> that by downloading six module tar.gz package, unpacking it and running "python setup.py install" from the 
> jhbuild shell, then retrying the glib build action.
>       • The second build issue is the already described - the __builtin_shuffle problem in pixman. I've 
> manually edited the code similar to patch by Phil Chimento and retried the build.
>
> Can these two things be integrated into the jhbuild itself?
>
> Once more, thank you for your support.
>
> Regards,
>   Miroslav
>
> From: John Ralls <jralls ceridwen us>
> Sent: Thursday, May 31, 2018 11:45 PM
> To: Miroslav Rajcic
> Cc: gtk-osx-users-list gnome org
> Subject: Re: [gtk-osx-users] High Sierra issues
>  
>
>
> > On May 16, 2018, at 5:50 PM, John Ralls <jralls ceridwen us> wrote:
> >
> >
> >
> > > On May 15, 2018, at 11:32 AM, Miroslav Rajcic <mrajcic hotmail com> wrote:
> > >
> > > Hi,
> > >
> > > I've tried to build GTK3 64-bit stack using gtk-osx, but got some issues in the process.
> > > I am using High Sierra 10.13.4, Xcode 9.3.
> > >
> > > Added this to .jhbuildrc-custom:
> > > setup_sdk(target="10.8")
> > >
> > > My build process:
> > > 1) ./gtk-osx-build-setup.sh
> > > 2) jhbuild bootstrap                          (...issue with cmake, see below ...)
> > > 3) jhbuild build meta-gtk-osx-bootstrap meta-gtk-osx-gtk3 meta-gtk-osx-themes gtksourceview3         
> > > (... many issues here, see below ...)
> > >
> > > Step #1 worked OK.
> > >
> > > Step #2 had the following issue with building cmake (I chose to ignore this module):
> > > Error when bootstrapping CMake:
> > > Cannot find a C++ compiler supporting C++11 on this system.
> > > Please specify one using environment variable CXX.
> > > See cmake_bootstrap.log for compilers attempted.
> > > ---------------------------------------------
> > > Log of errors: /Users/miro/gtk/source/cmake-3.10.0/Bootstrap.cmk/cmake_bootstrap.log
> > > ---------------------------------------------
> > > *** Error during phase configure of cmake: ########## Error running ./bootstrap 
> > > --prefix=/Users/miro/gtk/inst *** [8/24] 
> > > ...
> > > *** module meta-bootstrap not built due to non buildable cmake *** [24/24]
> > > *** the following modules were not built *** [24/24] 
> > > cmake meta-bootstrap
> > >
> > > Step #3 had the following issues, I chose to ignore modules in order to collect all the issues at one 
> > > place:
> > >
> > >   GEN    pt_BR/
> > > /Users/miro/gtk/inst/bin/bash: line 1: 28115 Segmentation fault: 11  itstool -m "${mo}" 
> > > ${d}/C/index.docbook ${d}/C/fdl-appendix.xml
> > > make[2]: *** [fr/fr.stamp] Error 139
> > > make[2]: *** Waiting for unfinished jobs....
> > > /Users/miro/gtk/inst/bin/bash: line 1: 28130 Segmentation fault: 11  itstool -m "${mo}" 
> > > ${d}/C/index.docbook ${d}/C/fdl-appendix.xml
> > > make[2]: *** [pt_BR/pt_BR.stamp] Error 139
> > > make[1]: *** [all-recursive] Error 1
> > > make: *** [all-recursive] Error 1
> > > *** Error during phase build of gtk-doc: ########## Error running make -j 5  *** [12/43] 
> > >
> > > I've tried to reduce the job done by gtk-doc build process by adding this, but it did not help:
> > > append_autogenargs("gtk-doc", "--without-xml --without-yelp-tools")
> > >
> > > ...
> > >
> > >  CC       alphamap.o
> > > utils-prng.c:207:27: error: use of unknown builtin '__builtin_shuffle'
> > >       [-Wimplicit-function-declaration]
> > >             randdata.vb = __builtin_shuffle (randdata.vb, bswap_shufflemask);
> > >                           ^
> > > utils-prng.c:207:25: error: assigning to 'uint8x16' (vector of 16 'uint8_t'
> > >       values) from incompatible type 'int'
> > >             randdata.vb = __builtin_shuffle (randdata.vb, bswap_shufflemask);
> > >                         ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > 2 errors generated.
> > > make[2]: *** [utils-prng.lo] Error 1
> > > make[2]: *** Waiting for unfinished jobs....
> > > make[1]: *** [all-recursive] Error 1
> > > make: *** [all] Error 2
> > > *** Error during phase build of pixman: ########## Error running make -j 5  *** [16/43]
> > >  
> > > Other issues are a consequence of these previous ones (described above):
> > >
> > > checking GLib Version... checking for gtk-doc... no
> > > configure: WARNING:
> > >   You will not be able to create source packages with 'make dist'
> > >   because gtk-doc >= 1.11 is not found.
> > > checking for gtkdoc-check... no
> > > checking for gtkdoc-check... no
> > > checking for gtkdoc-rebase... no
> > > checking for gtkdoc-mkpdf... no
> > > checking whether to build gtk-doc documentation... no
> > > checking for GTKDOC_DEPS... yes
> > > checking for GTK3... no
> > > configure: WARNING: GTK+-3.0 not found
> > > checking for GTK2... no
> > > configure: WARNING: GTK+-2.0 not found
> > > configure: error: Neither GTK+-2.0 nor GTK+-3.0 was found
> > > *** Error during phase configure of gtk-mac-integration: ########## Error running ./configure --prefix 
> > > /Users/miro/gtk/inst --disable-python   *** [32/43] 
> > >
> > > checking for LIBRSVG... no
> > > configure: error: Package requirements (    gdk-pixbuf-2.0 >= 2.20     glib-2.0 >= 2.12.0     gio-2.0 >= 
> > > 2.24.0     libxml-2.0 >= 2.7.0     pangocairo >= 1.32.6     cairo >= 1.2.0     cairo-png >= 1.2.0
> > >         libcroco-0.6 >= 0.6.1) were not met:
> > >
> > > No package 'pangocairo' found
> > > No package 'cairo' found
> > > No package 'cairo-png' found
> > >
> > > Consider adjusting the PKG_CONFIG_PATH environment variable if you
> > > installed software in a non-standard prefix.
> > >
> > > Alternatively, you may set the environment variables LIBRSVG_CFLAGS
> > > and LIBRSVG_LIBS to avoid the need to call pkg-config.
> > > See the pkg-config man page for more details.
> > > *** Error during phase configure of librsvg: ########## Error running ./configure --prefix 
> > > /Users/miro/gtk/inst --disable-Bsymbolic   *** [35/43]
> > > ...
> > > configure: error: GTK+-2.12 is required to compile gtk-engines
> > > *** Error during phase configure of gtk-engines: ########## Error running ./configure --prefix 
> > > /Users/miro/gtk/inst    *** [41/43]
> > > ...
> > > No package 'gtk+-3.0' found
> > >
> > > Consider adjusting the PKG_CONFIG_PATH environment variable if you
> > > installed software in a non-standard prefix.
> > >
> > > Alternatively, you may set the environment variables DEP_CFLAGS
> > > and DEP_LIBS to avoid the need to call pkg-config.
> > > See the pkg-config man page for more details.
> > > *** Error during phase configure of gtksourceview3: ########## Error running ./configure --prefix 
> > > /Users/miro/gtk/inst    *** [43/43]
> > >
> > > *** the following modules were not built *** [43/43]
> > > gtk-doc meta-gtk-osx-bootstrap pixman cairo gobject-introspection pango gtk+-3.0 gtk-mac-integration 
> > > librsvg adwaita-icon-theme gnome-themes-standard meta-gtk-osx-gtk3-core-themes meta-gtk-osx-gtk3 
> > > gtk-engines meta-gtk-osx-themes gtksourceview3 
> > >
> > > Note that I got the same issues with gtk-doc when adding "python" into the step #3.
> > >
> > > Any tips to resolve these issues?
> >
> > Thanks for reporting this.
> >
> > I haven’t yet tried building from scratch with Xcode 9.3 so there may be some new wrinkles. Unfortunately 
> > there are a bunch of modules that insist on gtk-doc even if you tell them that you don’t want to build 
> > the documentation.
> >
> > gtk-doc built for me a couple of weeks ago when I built Python3 first and then from a jhbuild shell 
> > installed pypi and six.
> >
> > The __builtin_shuffle problem is https://bugs.freedesktop.org/show_bug.cgi?id=104886. Phil Chimento has 
> > provided a patch.
>
> Sorry it took so long to get back to this. I overlooked something when I first read your letter: 
> meta-gtk-osx-themes is for gtk2, you want meta-gtk-osx-core-themes instead.
> Also, if you're targeting an old MacOS version you need to build Python or gobject-introspection will fail 
> to link because of differing mac-osx-minimum-version flags between it and libpython.
>
> I just did a build from scratch with Xcode 9.4, no problems. It looks like you have a compiler problem: 
> Clang from Xcode 9 is most assuredly C++11-capable, itstool shouldn't segfault, and pixman should be able 
> to figure out that clang does __builtin_shufflevector but not __builtin_shuffle.
>
> Regards,
> John Ralls