Re: Mobile broadband connects to wrong USB device

[Ben <ben benjamin it>]

Yeah, I just saw that that was where you change the init string before. 
After compiling this, it got passed the error and a it tried to do a few 
more things which all were successful. Then it comes up with an error:

Invalid byte sequence in conversion input

Well actually after a reboot and trying again (running the 
/usr/local/sbin/NetworkManager which is the newly installed one) I get:

symbol lookup error: NetworkManager: undefined symbol: 
nm_setting_connection_get_autoconnect

So that's not good, looks like a library hasn't installed correctly or 
something.


Jerone Young wrote:
> Before you decide to do that. What is the output if you swith it back 
> to ttyUSB0?
>
> To change the initialization commands you can start in
> src/nm-gsm-device.c
>
>
> On Tue, 2009-01-06 at 16:40 +1100, Ben wrote:
>   
> > Is there a way to change the init string? When I run:
> >
> > NM_SERIAL_DEBUG=1 /usr/sbin/NetworkManager --no-daemon
> >
> > I can see that it's trying to send an init string that is different to 
> > the one that I'm using in my /etc/wvdial.conf file. Then, an error gets 
> > returned saying that it couldn't initialise the modem. I'm pretty sure 
> > that if I change this init string in NetworkManager that it will work.
> >
> > Ben.
> >
> > Jerone Young wrote:
> >     
> > > You can look in /var/log/daemon.log.
> > >
> > > You can also run Network Manager in debug mode (as root):
> > > 1)  /etc/init.d/network-manager stop
> > > 2) NetworkManager --no-daemon
> > >
> > > You will see debug message in the Window.
> > >
> > > On Tue, 2009-01-06 at 13:36 +1100, Ben wrote:
> > >   
> > >       
> > > > Hmmm no if I change the int to a 4 and reboot, it tries to connect but 
> > > > about half a second later it instantly connects back to what it had 
> > > > originally connected to (LAN or whatever). There is nothing in the log 
> > > > (/var/log/messages) about what it's doing so it's hard to say. But if I 
> > > > set int to be 3 for example and then connect, it says it's trying to 
> > > > dial ttyUSB3, so setting it to 4 I am assuming it is trying to connect 
> > > > to ttyUSB4.
> > > >
> > > > Any other suggestions? Is there any other place where it could be 
> > > > logging failed attempts? I read somewhere that it could put info in 
> > > > /var/log/networkmanager but I don't have that file.
> > > >
> > > > Thanks for the help.
> > > >
> > > > Jerone Young wrote:
> > > >     
> > > >         
> > > > > Ok I might have screwed it up. You can hack your local copy easily
> > > > > though. First back it up. Then edit
> > > > > /usr/share/hal/fdi/information/10freedesktop/10-modem.fdi
> > > > >
> > > > > line 334
> > > > > You will see
> > > > > <match key="@info.parent:usb.interface.number" int="0">
> > > > >
> > > > > Change this to
> > > > > <match key="@info.parent:usb.interface.number" int="4">
> > > > >
> > > > > Let us know if that works.
> > > > >
> > > > >
> > > > > On Tue, 2009-01-06 at 12:24 +1100, Ben wrote:
> > > > >   
> > > > >       
> > > > >           
> > > > > > Thanks for the suggestion. I tried your fix however when I copied this 
> > > > > > file over the original one (made backup first) and then reboot, I can 
> > > > > > create a connection but now I no longer see it in the connection list. 
> > > > > > I'm using NetworkManager applet 0.7.0.
> > > > > >
> > > > > > Jerone Young wrote:
> > > > > >     
> > > > > >         
> > > > > >