Re: Initial integration of the new MM iface in NM

[Marius Kotsbak <marius kotsbak gmail com>]

Den 01. nov. 2012 08:50, skrev Marius Kotsbak:
> Den 24. okt. 2012 19:26, skrev Aleksander Morgado:
> > This series of patches add the basic integration needed in 
> > NetworkManager in
> > order to handle the new 'ModemManager1' interface.
>
> I finally got this tested, and the results are that wifi is working 
> fine, and also the old modem manager (MM_06).

Another issue:

ModemManager[25181]: <debug> [1351756301.072713] 
[mm-at-serial-port.c:392] debug_log(): (ttyUSB3): --> 'AT+CIND?<CR>'
ModemManager[25181]: <debug> [1351756301.086296] 
[mm-at-serial-port.c:392] debug_log(): (ttyUSB3): <-- '<CR><LF>+CIND: 
5,4,1,1,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
ModemManager[25181]: <debug> [1351756301.086766] [mm-serial-port.c:969] 
mm_serial_port_close(): (ttyUSB3) device open count is 3 (close)
ModemManager[25181]: <info>  [1351756301.087220] [mm-iface-modem.c:971] 
update_signal_quality(): Modem /org/freedesktop/ModemManager1/Modem/0: 
signal quality updated (80)

That seems correct, but in nm-applet, the indication is no/poor signal. 
Is there a known error here?

--
Marius