Re: MC 7304 ipv4v6

[tschaefer t-online de]

I would expect to get the Ipv6-information via qmicli and setting them manually (later via mm, nm), like now 
for ipv4.(without dhcp, without slaac)
I want to know if rawip is better than 802.3 in respect to dualstack, where some of my devices fail.
Thomas


Am 29.11.2015 17:43 schrieb Reinhard Speyerer <rspmn arcor de>:
> On Sat, Nov 28, 2015 at 10:58:17PM +0100, Thomas Schäfer wrote: 
> > [...] 
> > I would be very happy if somebody tells me the steps for testing with PDP- 
> > context IPv4v6. 
>
> Not sure whether this also applies to qmi-cli as I used a different 
> QMI client (which leaves network interface initialization to the 
> application) for a short dualstack test with Linux kernel 3.12.x and a 
> MC7304 but for me IPv6 only worked when explicitly assigning a 
> link-local address with e.g. 
> # ifconfig wwan<n> inet6 add fe80::1:2:3:4/64 up 
> when the network interface was set to raw IP mode instead of simply using 
> # ifconfig wwan<n> inet6 up 
> as no router solicitations were sent out otherwise. 
>
> Regards, 
> Reinhard