Re: [orca-list] Problem running orca



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

You'll need a synth if you want any speech!
Try the following commands
export SAL_USE_VCLPLUGIN="gtk"
export GTK_MODULES=gail:atk-bridge
startx
As far as python3 goes, I've ran both python 2 and 3 on Arch, Debian,
and Ubuntu with no conflicts whatsoever.

Bill
On 03/02/2013 11:16 PM, Alex Midence wrote:
All the other suggestions and questions notwithstanding, I wonder
if anyone's tackled the most fundamental problem:

Orca does not read Xterm.  It never has in my experience neither
with braille nor with speech.  Gnome-termilnal yes, xterm?  Ce
n'est pas posible, mon ami.

Also, OpenBox is something I thought was not accessible.  If you
require minimal resources, perhaps you should try getting LXDE to
work for you. There are some messages in the archives of this
mailing list which give the steps.  I do not use LXDE but Jonathan
Nadeau and a few others have posted about this in the past.

Bonne Chance, Alex M


-- Alex Midence

* Linkedin: http://www.linkedin.com/pub/alex-midence/29/a25/520 *
Twitter: @hunbaatz * Facebook
http://www.facebook.com/alexjmidence/


On 3/2/2013 9:50 PM, Jean-Philippe MENGUAL wrote:
On Saturday 02 Mar 2013 à 22:40:10 (-0500), Bill Dengler wrote:
Install the "speech-dispatcher" package then, run spd-conf
Hmmm. I've installed one. Even after spd-conf, I've nothing
else. But right, at this time, I've not installed any speech
synthetiser (espeak). I hope I'll be able to use braille only.
I needn't speech synthetiser usually.

Is there a reason you don't want python3?
I try optimizing at maximum my system and as I use python2 for
most applications, I'm not so happy if both python2 and 3 are
installed. Both would be large on the system. And most apps
don't support python3 yet. Well if I cannot do better, I'll
install it, but first, I'd ;ike to know if I can use Python2. I
also don't know if I don't risk conflicts between modules and
releases.

Sincerely,


Bill On 03/02/2013 10:39 PM, Jean-Philippe MENGUAL wrote:
On Saturday 02 Mar 2013 à 22:26:55 (-0500), Bill Dengler
wrote: OK... do you hear "welcome to orca"?

No I don't. I only see, via xbrlapi, "Screen reader orca"
(so a window whose title is "screen reader orca"). But
indeed, I don't have "Welcome to orca". Thanks for your
help.

Bill On 03/02/2013 10:25 PM, Jean-Philippe MENGUAL wrote:
Hi,

I'm in progress in my experiences, but still not with
an orca. I explain. I use openbox, and I run orca
from an xterm terminal. I issue: orca
--enable=braille I have nothing. orca runs, but
nothing seems to appear, including the preferences 
window. I precise at-spi2-registryd is running.

So I run, while xterm is running and on a terminal
(tty1): DISPLAY=:0 orca --enable=braille

On the console, I get: File 
"/usr/local/lib/python2.7/site-packages/gi/types.py",
line 47, in function return info.invoke(*args,
**kwargs) gi._glib.GError: Could not locate
wnck_screen_get_default: (null)

orca crashes (I can kill it only with a kill -s 9
command).

I precise what I want: running orca from xterm (or at
X boot time via openbox autostart or what else I'll
find), and having displayed the preferences window.
Then, with alt-tab, I could access to OOo and
firefox. Xterm would say "inaccessible" but no
problem, I don't mind.

Is this behavior expected? Does a stack miss in my
system? I still use orca 3.6.2, as I'd like to avoid
Python3 required with latest orca releases. I have
installed pygobject and libwnck. But some stack must
miss in my architecture of accessibility.

Thanks for your help.

Regards,

JPM

_______________________________________________
orca-list mailing list orca-list gnome org 
https://mail.gnome.org/mailman/listinfo/orca-list
Visit http://live.gnome.org/Orca for more information
on Orca. The manual is at 
http://library.gnome.org/users/gnome-access-guide/nightly/ats-2.html




The FAQ is at http://live.gnome.org/Orca/FrequentlyAskedQuestions
Log bugs and feature requests at
http://bugzilla.gnome.org Find out how to help at 
http://live.gnome.org/Orca/HowCanIHelp

_______________________________________________ orca-list mailing
list orca-list gnome org 
https://mail.gnome.org/mailman/listinfo/orca-list Visit
http://live.gnome.org/Orca for more information on Orca. The
manual is at
http://library.gnome.org/users/gnome-access-guide/nightly/ats-2.html


The FAQ is at http://live.gnome.org/Orca/FrequentlyAskedQuestions
Log bugs and feature requests at http://bugzilla.gnome.org Find
out how to help at http://live.gnome.org/Orca/HowCanIHelp



_______________________________________________ orca-list mailing
list orca-list gnome org 
https://mail.gnome.org/mailman/listinfo/orca-list Visit
http://live.gnome.org/Orca for more information on Orca. The manual
is at
http://library.gnome.org/users/gnome-access-guide/nightly/ats-2.html


The FAQ is at http://live.gnome.org/Orca/FrequentlyAskedQuestions
Log bugs and feature requests at http://bugzilla.gnome.org Find out
how to help at http://live.gnome.org/Orca/HowCanIHelp


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
Comment: Using GnuPG with undefined - http://www.enigmail.net/
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=pMnH
-----END PGP SIGNATURE-----


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]