Re: [orca-list] Problems with Orca 40 Beta and how to return to the stable

[Vojtěch šmiro <vsmiro seznam cz>]

> Hello Peter,
>
> yes, you're right. That's link on the one row how I wrongly wrote. Sorry.
>
> Vojta.
>
> Dne 20. 02. 21 v 17:52 Peter Vágner napsal(a):
> > Hello,
> >
> > I thought this is just a little anoyance and no one will ever care.
> > However in this recent discussion with Vojta you have elliminated two 
> > of the issues where anchor text is displayed one character per line.
> >
> > If you can also take a look here: 
> > https://www.root.cz/zpravicky/networkmanager-1-30-s-192bitovym-wpa3-enterprise/ 
> >
> > I'm sorry, the site is all in czech and it can't be switched into 
> > english.
> > There is a heading at level 2 with the text "Sdílet" and there are 
> > four links below.
> > "Sdílejte na Facebooku" and "Sdílejte na Twitteru" were also displayed 
> > single character per line and they are now reported as a whole, the 
> > way I'd expect.
> > However the third link saying "    Líbí se vám zprávička?
> >      Podpořte redakci" this one is still displayed one character per 
> > line thus when reading up to bottom it's a bit anoying.
> >     �
> >      Is there a way so you can also tweak this one?
> >     �
> >      Greetings
> >     �
> >      Peter
> >    �
> >
> > Dňa 19. 2. 2021 o 16:06 Joanmarie Diggs napísal(a):
> > > Hi again Vojta.
> > >
> > > The link on a single line is now fixed for me in Orca master (aka
> > > 40.beta).
> > >
> > > In addition, it seems like the Tesco site is all ARIAed up with GUI
> > > roles (toolbar, menu, etc.) but they don't provide any navigation. That
> > > strikes me as a bad use of ARIA. Regardless, I've now made those things
> > > descendable in browse mode in Orca master (aka 40.beta) and the Tesco
> > > site sucks a lot less.
> > >
> > > I realize that you're doing your best to get away from Orca 40 Beta,
> > > but at least on my machine the problems I described above are also
> > > present in Orca 3.38 and 3.36. So if you are able to straighten your
> > > situation out and update to the very latest Orca master and test, that
> > > would be great.
> > >
> > > Thanks!
> > > --joanie
> > >
> > > On Fri, 2021-02-19 at 14:51 +0100, Joanmarie Diggs wrote:
> > > > To follow up: On the tesco site, I can reproduce the link presented
> > > > as
> > > > if each character were on a line by itself. It's in version 40 beta,
> > > > 3.38.2, and 3.36.6. So if that is what you are referring to in your
> > > > original message, that does not appear to be a regression. I'll try
> > > > to
> > > > fix that link presentation now.
> > > >
> > > > --joanie
> > > >
> > > > On Fri, 2021-02-19 at 14:39 +0100, Joanmarie Diggs wrote:
> > > > > Hi Vojta.
> > > > >
> > > > > I'll take a look at the site you mention. But when you have
> > > > > problems
> > > > > and you'd like them fixed, I need really precise steps to reproduce
> > > > > each problem. This is doubly so when it's a regression. This is
> > > > > triply
> > > > > so when we're approaching the stable release date.
> > > > >
> > > > > Thanks in advance and sorry you are having problems!
> > > > > --joanie
> > > > >
> > > > > On Fri, 2021-02-19 at 13:55 +0100, Vojtěch šmiro via orca-list
> > > > > wrote:
> > > > > > Hello,
> > > > > >
> > > > > > I have big problems with new Orca 40 Beta and I would like to
> > > > > > switch
> > > > > > back to the Orca stable. If I write
> > > > > > /usr/bin/orca -r
> > > > > > I will launch Orca 3.36.2, because that Orca is native in my
> > > > > > Ubuntu
> > > > > > Mate
> > > > > > 20.04. I would like to have 3.38.2, that's a good Orca version.
> > > > > >
> > > > > > I've tested
> > > > > > git clone https://gitlab.gnome.org/GNOME/orca.git
> > > > > > cd orca
> > > > > > sudo sh ./autogen.sh
> > > > > > make
> > > > > > sudo make install
> > > > > > sudo make clean
> > > > > > forever, not stable Orca.
> > > > > >
> > > > > > Stormux is fine too. I have problems with nakup.itesco.cz. It
> > > > > > spells
> > > > > > some link if I press down arrow, I see one letter on one row so I
> > > > > > have
> > > > > > isn't table, but toolbar in Orca beta. In Orca stable it's good.
> > > > > > How
> > > > > > to
> > > > > > switch to Orca 3.38.2 on Ubuntu Mate 20.04?
> > > > > >
> > > > > > Thanks a lot.
> > > > > >
> > > > > > Best regards
> > > > > >
> > > > > > Vojta.
> > > > > > _______________________________________________
> > > > > > orca-list mailing list
> > > > > > orca-list gnome org
> > > > > > https://mail.gnome.org/mailman/listinfo/orca-list
> > > > > > Orca wiki: https://wiki.gnome.org/Projects/Orca
> > > > > > Orca documentation: https://help.gnome.org/users/orca/stable/
> > > > > > GNOME Universal Access guide:
> > > > > > https://help.gnome.org/users/gnome-help/stable/a11y.html
> > > > >
> > > > > _______________________________________________
> > > > > orca-list mailing list
> > > > > orca-list gnome org
> > > > > https://mail.gnome.org/mailman/listinfo/orca-list
> > > > > Orca wiki: https://wiki.gnome.org/Projects/Orca
> > > > > Orca documentation: https://help.gnome.org/users/orca/stable/
> > > > > GNOME Universal Access guide:
> > > > > https://help.gnome.org/users/gnome-help/stable/a11y.html
> > > >
> > > > _______________________________________________
> > > > orca-list mailing list
> > > > orca-list gnome org
> > > > https://mail.gnome.org/mailman/listinfo/orca-list
> > > > Orca wiki: https://wiki.gnome.org/Projects/Orca
> > > > Orca documentation: https://help.gnome.org/users/orca/stable/
> > > > GNOME Universal Access guide:
> > > > https://help.gnome.org/users/gnome-help/stable/a11y.html
> > >
> > > _______________________________________________
> > > orca-list mailing list
> > > orca-list gnome org
> > > https://mail.gnome.org/mailman/listinfo/orca-list
> > > Orca wiki: https://wiki.gnome.org/Projects/Orca
> > > Orca documentation: https://help.gnome.org/users/orca/stable/
> > > GNOME Universal Access guide: 
> > > https://help.gnome.org/users/gnome-help/stable/a11y.html