sawfish-config seg fault

[c singer <cmsinger gmail com>]

Hello,

I hope this is the correct forum for this. 

I am running attempting to run sawfish 1. 6.3 via X.Org X Server 1.8.2  on OpenBSD 4.8 and the sawfish-config utility crashes with the following error:


$ sawfish-config
rep:/usr/local/lib/libgthread-2.0.so.1803.0: undefined symbol 'pthread_mutex_trylock'
lazy binding failed!
rep: received fatal signal: Segmentation fault

I am getting this error whether I run it from within a running X/sawfish environment, or outside of X on the command prompt. 

Google yielded a thread about this issue being discussed here, so I thought I had found my answer, but alas I am stumped.

Below are sawfish and its dependencies that I have installed (as packages, not ports), as well as the dmesg for my system. Do you need more debug/system info? This is a new installation, the only additional package installed is sawfish. It has not been updated to the -current tree. 

Thank you for any suggestions.
Charles


Sawfish and dependencies:

atk-1.30.0p0        
cairo-1.8.10p0      
desktop-file-utils-0.16p0 
gdbm-1.8.3p0        
gettext-0.18.1      
glib2-2.24.1p2      

glitz-0.5.6p2       
gmp-4.3.1           
gtk+2-2.20.1        
hicolor-icon-theme-0.12 
jpeg-8b             
libffi-3.0.8p2      
libgamin-0.1.10p3   
libiconv-1.13p1     
librep-0.90.5p1     
libxml-2.7.6        
pango-1.28.1        
pcre-8.02p1         
png-1.2.44          
rep-gtk-0.90.2p2    
sawfish-1.6.3p0     
shared-mime-info-0.71 
tiff-3.9.4          

System dmesg:

OpenBSD 4.8 (GENERIC.MP) #335: Mon Aug 16 09:09:20 MDT 2010

    deraadt amd64 openbsd org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3754782720 (3580MB)
avail mem = 3641016320 (3472MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xeb0a0 (39 entries)

bios0: vendor Insyde Corp. version "1.50" date 02/27/2009
bios0: TOSHIBA Satellite L305D
acpi at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) X2 Dual-Core QL-64, 2100.50 MHz

cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache

cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00

ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 vendor "ATI", unknown product 0x9613 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)

wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 4 function 0 "AMD RS780 PCIE" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci0 dev 5 function 0 "AMD RS780 PCIE" rev 0x00
pci3 at ppb2 bus 4

re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102E (0x3480), irq 7, address 00:1e:33:ad:6b:8b
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb3 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00

pci4 at ppb3 bus 5
ath0 at pci4 dev 0 function 0 "Atheros AR5424" rev 0x01: irq 10
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:d2:49:ba:c3
ppb4 at pci0 dev 7 function 0 "AMD RS780 PCIE" rev 0x00

pci5 at ppb4 bus 6
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: irq 11, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD5000BEVT-2, 01.0> SCSI3 0/direct fixed

sd0: 476940MB, 512 bytes/sec, 976773168 sec total
cd0 at scsibus0 targ 2 lun 0: <HL-DT-ST, DVDRAM GSA-T50F, TT04> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: irq 5, version 1.0, legacy support

ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: irq 5, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1

ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: irq 10, version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: irq 10, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: irq 4

usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3a: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM

spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility

azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: irq 5
azalia0: codecs: Realtek ALC268, AT&T/Lucent/0x1040, using Realtek ALC268
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00

ppb5 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci6 at ppb5 bus 128
pchb1 at pci0 dev 24 function 0 "AMD AMD64 11h HyperTransport" rev 0x40
pchb2 at pci0 dev 24 function 1 "AMD AMD64 11h Address Map" rev 0x00

pchb3 at pci0 dev 24 function 2 "AMD AMD64 11h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 11h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 11h Link Cfg" rev 0x00

usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0

uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5

pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61

spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
umass0 at uhub1 port 4 configuration 1 interface 0 "Generic USB2.0-CRW" rev 2.00/58.87 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0

sd1 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct removable
sd1: drive offline
softraid0 at root
root on sd0a swap on sd0b dump on sd0b