[GnomeMeeting-list] gnomemeeting-0.98.5-1 and Quicknet PhoneJack PCI



Hi all,
I had 2 Quicknet PhoneJack PCI.
After I installed newest version of quicknet driver ( ixj-3.1.0 ) / nixj, but still can not setup a phone call ( use 2 analog phones ) between 2 linux boxes in the same LAN.
 
I also tested the phone jack with ixjsdk and nsdk. The phone jack work well.
 
One of two linux boxes can hear the other side.
I don;t know what's happen with my Gnomemeeting.
 
-----------------
2 linux boxes with the same configurations and output:
    - gnomemeeting-0.98.5-1 with openh323-1.12.0-2 & pwlib-1.5.0-2
    - Linux RedHat 9.0
    - modprobe ixj and check dmesg
Linux telephony interface
$Id: phonedev.c,v 1.4 2003/03/10 02:56:58 dereks Exp $ $Revision: 1.4 $
Phonedev compiled Nov  8 2003 04:28:14
PCI: Found IRQ 11 for device 00:08.0
PCI: Sharing IRQ 11 with 00:12.0
IXJ skip 8022 DSP for TJ setup
IXJ PhoneJACK TJ PCI at 0xd000
IXJ PhoneJACK TJ serial No: 0x533a00fe
IXJ PhoneJACK TJ SLIC version 0x05
IXJ module installed OK
IXJ $Id: ixj.c,v 1.104 2003/11/02 20:40:28 dereksmithies Exp $
IXJ compiled Nov  8 2003 04:28:10
IXJ Debugging flags:
   
    - lsmod
Module                  Size  Used by    Not tainted
ixj                   121892   0
phonedev                3808   1  [ixj]
soundcore               6404   0  (autoclean)
autofs                 13268   0  (autoclean) (unused)
via-rhine              15856   1
mii                     3976   0  [via-rhine]
ohci1394               20168   0  (unused)
ieee1394               48780   0  [ohci1394]
ov511                  82304   0
videodev                8288   1  [ov511]
keybdev                 2944   0  (unused)
mousedev                5492   1
hid                    22148   0  (unused)
input                   5856   0  [keybdev mousedev hid]
ehci-hcd               19976   0  (unused)
usb-uhci               26348   0  (unused)
usbcore                78784   1  [ov511 hid ehci-hcd usb-uhci]
ext3                   70784   2
jbd                    51892   2  [ext3]
    - cat /proc/ixj
$Id: ixj.c,v 1.104 2003/11/02 20:40:28 dereksmithies Exp $
$Id: ixj.h,v 1.18 2003/09/18 09:52:15 dereksmithies Exp $
$Id: ixjuser.h,v 1.14 2003/08/31 22:26:43 dereksmithies Exp $
$Id: ixj_data.h,v 1.18 2003/09/18 09:52:15 dereksmithies Exp $
Driver version 3.1.0
sizeof IXJ struct 24020 bytes
sizeof DAA struct 642 bytes
Using old telephony API
Debugging flags:
 

Card Num 0
DSP Base Address 0xd0c0
XILINX Base Address 0x0000/0x00
DSP Type 8022
DSP Version 01.17
Serial Number 533a00fe
Card Type = Internet Phonejack TJ pci
Readers 0
Writers 0
Capabilities 13
DSP Processor load 105
Play Codec : undefined
Record Codec : undefined
AEC none
Rec volume 0x100
Play volume 0x100
DTMF prescale 0x40
Hook:  on hook
Port pots
SLIC state PLD_SLIC_STATE_OC
Base Frame 07.f0
CID Base Frame  0
Frames Read 0
Frames Written 0
Pots send ring pattern:  [1000]    3000  [1000]    3000
 
Thank in advanced.
 
 


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]