Re: [GnomeMeeting-list] Setup question

[Damien Sandras <dsandras seconix com>]

hi :)


> >
> > Sorry but I'm a bit puzzled by your tests, what you are trying to
> > achieve and what works and what doesn't.
> 
> I am a VOIP beginner...so not all things I try might make sense.
> 

No worries, the setup is not complex. But I'm lost in the explanations.

> >
> > Things seem however simple.
> >
> > You have 2 cases. Imagine that you have machine A and B, and gateway C.
> > If you get a call from C to A and want to forward it to B through C
> > then you simply put B as forward host, C as gateway, and enable "use
> > gateway", or you use no gateway and use h323:B C as forward URL, you
> > will do this on A.
> 
> That is not what I want to do.
> 
> >
> > If you get a call from C to A and want to forward it to B, without using
> > C, then you simply put B as forward host and that's all. You will do
> > this on A.
> >
> 
> That is what I want to achieve.
> 

OK, in that case, what you have to do is  :
- do not use a gateway
- put the IP of the destination of the call forward in the call
forwarding box (h323:XXX.XXX.XXX.XXX)
- enable call forwarding

> The log (I am surprised that there is no indication at all about the 
> forward_host 118.145.140.124):
> 
> 2005/02/24 23:27:35.760 5:26:20.313       H323 Listener:83340e8 H323TCP 
> Started connection:  host=::ffff:118.152.191.172:3201, 
> if=118.152.251.114:1720, handle=45

118.152.251.114 is the local address of the GM that is forwarding the
call it just received.

> 2005/02/24 23:27:35.783 5:26:20.336         H225 Answer:88f15a8 H323    
> Created new connection: ip$[::ffff:118.152.191.172]:3201/164
> 2005/02/24 23:27:35.783 5:26:20.337         H225 Answer:88f15a8 H225    
> Handling PDU: Setup callRef=164
> 2005/02/24 23:27:35.784 5:26:20.337         H225 Answer:88f15a8 H245    
> Stopping MasterSlaveDetermination: state=Idle
> 2005/02/24 23:27:35.785 5:26:20.338         H225 Answer:88f15a8 H245    
> Stopping TerminalCapabilitySet: state=Idle
> 2005/02/24 23:27:35.785 5:26:20.338         H225 Answer:88f15a8 H225    Set 
> remote application name: "Cisco IOS 12.x    181/18"
> 2005/02/24 23:27:35.785 5:26:20.339         H225 Answer:88f15a8 H225    Set 
> protocol version to 2 and implying H.245 version 3
> 2005/02/24 23:27:35.786 5:26:20.339         H225 Answer:88f15a8 H225    
> Sending call proceeding PDU
> 2005/02/24 23:27:35.788 5:26:20.341         H225 Answer:88f15a8 H225    
> Sending PDU: callProceeding
> 2005/02/24 23:27:35.798 5:26:20.351         H225 Answer:88f15a8 H225    
> Sending PDU: facility
> 2005/02/24 23:27:35.799 5:26:20.352         H225 Answer:88f15a8 H323    
> Clearing connection ip$[::ffff:118.152.191.172]:3201/164 
> reason=EndedByNoAccept
> 2005/02/24 23:27:35.800 5:26:20.353         H225 Answer:88f15a8 H323    Call 
> end reason for ip$[::ffff:118.152.191.172]:3201/164 set to EndedByNoAccept
> 2005/02/24 23:27:35.800 5:26:20.353         H225 Answer:88f15a8 H225    

The call is not forwarded, it is rejected. Can you watch what happens in
the "General History"?

What happens in the GUI when you activate call forwarding, isn't there
an error message?
-- 
 _      Damien Sandras
(o-     GnomeMeeting: http://www.gnomemeeting.org/
//\     FOSDEM 2005 : http://www.fosdem.org
v_/_    H.323 phone : callto:ils.seconix.com/dsandras seconix com