Re: [GnomeMeeting-list] Setup question



Hi Damien,

> > > If you get a call from C to A and want to forward it to B, without
> > > using C, then you simply put B as forward host and that's all. You will
> > > do this on A.
> >
> > That is what I want to achieve.
>
> OK, in that case, what you have to do is  :
> - do not use a gateway
I did not use the gateway.

> - put the IP of the destination of the call forward in the call
> forwarding box (h323:XXX.XXX.XXX.XXX)

I missed the h323: so far. Added it now, but still does not work.

> - enable call forwarding
>
> > The log (I am surprised that there is no indication at all about the
> > forward_host 118.145.140.124):
> >
> > 2005/02/24 23:27:35.760 5:26:20.313       H323 Listener:83340e8 H323TCP
> > Started connection:  host=::ffff:118.152.191.172:3201,
> > if=118.152.251.114:1720, handle=45
>
> 118.152.251.114 is the local address of the GM that is forwarding the
> call it just received.

Correct, it should forward it to 118.145.140.124


>
> > 2005/02/24 23:27:35.783 5:26:20.336         H225 Answer:88f15a8 H323
> > Created new connection: ip$[::ffff:118.152.191.172]:3201/164
> > 2005/02/24 23:27:35.783 5:26:20.337         H225 Answer:88f15a8 H225
> > Handling PDU: Setup callRef=164
> > 2005/02/24 23:27:35.784 5:26:20.337         H225 Answer:88f15a8 H245
> > Stopping MasterSlaveDetermination: state=Idle
> > 2005/02/24 23:27:35.785 5:26:20.338         H225 Answer:88f15a8 H245
> > Stopping TerminalCapabilitySet: state=Idle
> > 2005/02/24 23:27:35.785 5:26:20.338         H225 Answer:88f15a8 H225   
> > Set remote application name: "Cisco IOS 12.x    181/18"
> > 2005/02/24 23:27:35.785 5:26:20.339         H225 Answer:88f15a8 H225   
> > Set protocol version to 2 and implying H.245 version 3
> > 2005/02/24 23:27:35.786 5:26:20.339         H225 Answer:88f15a8 H225
> > Sending call proceeding PDU
> > 2005/02/24 23:27:35.788 5:26:20.341         H225 Answer:88f15a8 H225
> > Sending PDU: callProceeding
> > 2005/02/24 23:27:35.798 5:26:20.351         H225 Answer:88f15a8 H225
> > Sending PDU: facility
> > 2005/02/24 23:27:35.799 5:26:20.352         H225 Answer:88f15a8 H323
> > Clearing connection ip$[::ffff:118.152.191.172]:3201/164
> > reason=EndedByNoAccept
> > 2005/02/24 23:27:35.800 5:26:20.353         H225 Answer:88f15a8 H323   
> > Call end reason for ip$[::ffff:118.152.191.172]:3201/164 set to
> > EndedByNoAccept 2005/02/24 23:27:35.800 5:26:20.353         H225
> > Answer:88f15a8 H225
>
> The call is not forwarded, it is rejected. Can you watch what happens in
> the "General History"?

Is that dumped into a file? I am enabling the forwarding with gconftool-2 via 
a shell console.

>
> What happens in the GUI when you activate call forwarding, isn't there
> an error message?

I did not watch the GUI while enabling since I did that from remote. I did not 
see a popup error box, when I returned to the workstation, running the 
gnomemeeting forwarding the call.

When starting up gnomemeeting 1.2.1 I sometimes see

[assert] error: 111 (Connection refused)
[assert] where: "socket.c", "sw_socket_tcp_connect", line: 720

This is with forwarding disabled and  happens only sometimes.

Thanks,
Rainer

-- 
Rainer Dorsch
Alzentalstr. 28
D-71083 Herrenberg
07032-919495
Icq: 32550367



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]